Hi evereyone, thank you for your attention!
A friend of mine yesterday give me a Sony Bravia KDL-32W4000 that doesn't turn on at all, no standby light. I've never repaired a LCD tv before, but I am quite good at electronics and I learned how all the part of a LCD works.
First thing I noted when I opened the back panel was that the T-CON was sconnected from the lvds cable. I've tried to reconnect it but it seems it is doesn't fix it properly. The T-CON model mounted is 320AP03C2LV0.1 but searching in the internet they say it is not the proper one for the sony kdl32w4000. The proper one should be
http://flattvparts.co.uk/...mp;products_id=12857
but my panel has only one ribbon cable connection! I don't understand why there is this difference between what my TV should have and what in reality has...
The panel is SAMSUNG LTF320AH01.
Anyway I don't think the problem with the turning on is due to this, but I think power board is dead: I've checked fuse and capacitors and it is all ok, but I've also checked with a tester and there is no standby voltage at all. What do you think about it?
So have you got any ideas of the reason why the T-CON is different and it doesn't fix the lvds cable (it is very hard to push it inside the T-CON socket...)??? My friend told me no one has opened the tv before but it sounds to me quite strange...
I'm very thankful for you attention, if you need more details, photos or something more just ask me! Thank you very much and sorry for my English which is not so good.
A friend of mine yesterday give me a Sony Bravia KDL-32W4000 that doesn't turn on at all, no standby light. I've never repaired a LCD tv before, but I am quite good at electronics and I learned how all the part of a LCD works.
First thing I noted when I opened the back panel was that the T-CON was sconnected from the lvds cable. I've tried to reconnect it but it seems it is doesn't fix it properly. The T-CON model mounted is 320AP03C2LV0.1 but searching in the internet they say it is not the proper one for the sony kdl32w4000. The proper one should be
http://flattvparts.co.uk/...mp;products_id=12857
but my panel has only one ribbon cable connection! I don't understand why there is this difference between what my TV should have and what in reality has...
The panel is SAMSUNG LTF320AH01.
Anyway I don't think the problem with the turning on is due to this, but I think power board is dead: I've checked fuse and capacitors and it is all ok, but I've also checked with a tester and there is no standby voltage at all. What do you think about it?
So have you got any ideas of the reason why the T-CON is different and it doesn't fix the lvds cable (it is very hard to push it inside the T-CON socket...)??? My friend told me no one has opened the tv before but it sounds to me quite strange...
I'm very thankful for you attention, if you need more details, photos or something more just ask me! Thank you very much and sorry for my English which is not so good.
Comment