Sharp Aquos LC-32GD8E

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • gilly1984
    Badcaps Veteran
    • Jun 2012
    • 751
    • UK
    #41
    Re: Sharp Aquos LC-32GD8E

    , £33.59 from flat tv parts.

    Will get one when got spare cash.

    What could cause the firmware to corrupt?
    Do NOT touch heatsinks when testing for voltages as they may be LIVE!

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK
        #42
        Re: Sharp Aquos LC-32GD8E

        How much do you have in the TV? Last time I looked for main board for LC-32SD1E it was £60!!! So lucky I could fix it by resetting.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • gilly1984
            Badcaps Veteran
            • Jun 2012
            • 751
            • UK
            #43
            Re: Sharp Aquos LC-32GD8E

            Paid £5 for it off ebay

            29.99 off flat tv parts and £3 delivery.

            But the ad said it had standby light?
            Do NOT touch heatsinks when testing for voltages as they may be LIVE!

              Comment

              Previous 1 2 3 template Next

              Related Topics

              Collapse
              • scubacamper
                Sharp Aquos LC-70C6400U Half Screen Dark
                by scubacamper
                I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                https://youtu.be
                05-03-2025, 12:19 PM
              • sefoster
                Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                by sefoster
                I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                11-20-2022, 09:29 AM
              • jonah1024
                Sharp Aquos LC-40UG7252E LCD TV burn in?
                by jonah1024
                Hello!

                I'm a few days old into this TV screens repair universe so please bear with me.

                Recently, and all of a sudden my 40” 4K Sharp Aquos LCD TV turned on with colors all smudged in some places on the screen that remain like that even without any kind of video source. I do have image but the colors are smudged/tinted/ washed out in patches as per defects. This to me looks similar to burn in but I’m shore this is not an OLED.

                - I did the classic unplug and hold power button to discharge the caps but it didn't help.
                - I did a factory reset as well...
                5 Photos
                07-16-2024, 04:23 AM
              • fixit007
                Samsung flicker - BN44-00932T board or else?
                by fixit007
                I picked up this TV that the prior owner said - just died.

                Tested the fuse - burnt. A dead capacitor is visible too on the hot side (CP801). Got the replacement power board (cheaply - used). Replaced the board - the TV turned ON!

                Now, about a month later (yesterday) I noticed the left side of the screen was flickering from time to time. That was already happening with the antenna input, not through HDMI.

                Also, some glitchiness with a Fire stick on HDMI3 - I hit an app with quick dark screen in stick, the TV goes - no input. Then I had to choose the stick...
                05-04-2024, 06:14 PM
              • klassic
                Sharp Aquos LC-60LE635E three blinks
                by klassic
                Hi community,

                I will describe my problem with a TV in those short following terms to be the most precise :

                What i have :
                Sharp Aquos LC-60LE635E
                power board DPS-162KP-1
                main logic board QPWBXF733WJN2

                symptoms :
                white led light logo at startup,
                after 2 minutes, blinking 3 times a row, repeating
                no backlight (and apparently no picture, checked panel with flashlight)
                no startup sound

                powerboard investigations :

                1-2 PNL : 0v
                3-4 GND
                5-6-7-8 UR : 13.15v
                9-10-11-12...
                10-24-2023, 01:39 PM
              • Loading...
              • No more items.
              Working...