This has a Flashing Red Power Lamp,which can take an hour or more before starting to operate correctly.I understand there is a repair kit being sold for this,which I involves replacing some SMD parts,,does anyone know what parts are actually required ?? Photo to follow IF required.
-
-
Re: 42lg7000(eay4050520 eax40157601/17)
The kits I have looked at have the board designation numbers so you
will be able to see what is in the kit by looking on the board - unless they have made the numbers up? chs are pretty good they have an online query system and I once asked them something like what it is IC2 in your kit and they told me.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: 42lg7000(eay4050520 eax40157601/17)
regretfully the one on Ebay only shows a written piece of paper,no doubt the designations etc are all on that..he is giving nothing away !!!Comment
-
Hi,
I need to replace the LEDs of this TV. The screen is glued with double sided tape. This video shows the proceudre required.
I need a source for this type of double sided tape adhesive please.
https://www.youtube.com/watch?v=bN6g...nel=QUADRA-NET
Tks! -
Hi All,
Need a bit of assistance digging up some information on current technology support required for modern motherboards to post? By modern let's say 6th gen skylake to current intel and all of the Ryzen series. You would think this would be on the ARK product page, but nope. Besides saying dedicated graphics required it doesn't really tell you squat.
Reason I ask is I've ran into this a few times now (first on 6th gen SkyLake and now on 12th gen AlderLake) where if I use an intel F SKU CPU multiple different boards refuse to post with multiple different graphics... -
HikVision DS-7104HQHI-K1 Motherboard: DS-80303_P REV 2.0 and SN: C47579229 Firmware dump or unlock required. Thank you!...06-11-2025, 01:54 PM -
Hi all,
First time trying to fix a TV for a friend, it's a Bush DLED32165HD.
Power Board - 17IPS11
Mainboard - 17MBS82S
Panel - VES315WNDB-02
Red blinking standby light is on steady, press power button on remote and light flashes 7 times then stays steady, press power on remote again light flashes 10 times and then goes off.
Checked all the voltages on the power board inc backlight circuit, they all read ok and are stable. Backlights tested with backlight tester and all work fine (2 strips x11LED on each).
No picture, backlight or sound just blinking... -
Hi Master's Help Required HP Pavilion DV2 Laptop
PCB : P/N:HPMH-41-AB3700-D00G
PWA : P/N:HPMH-40GAB3700-D
REV : D06-04-2025, 08:22 AM
Comment