Vizio VL320M replacement panel ?

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gariarto
    Senior Member
    • Jul 2012
    • 151
    • USA
    #1

    Vizio VL320M replacement panel ?

    Hi guys, I just got a Vizio VL320M HD TV to look at. It needs a replacement LCD panel since this one is busted in one corner. After going round in circles on the internet I can't find any vendors for a panel. Even Ebay only comes up with PSU and logic boards. Does anyone know where these panels can be sourced if they're even available ? I also looked for non working units with a good screen.. Nada.

    Thanks in advance !
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Vizio VL320M replacement panel ?

      In general, it's not worth it -- but if you're certain about changing it then note down the panel number e.g. SAMSUNG LTA32xxxx and look up that up on ebay.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • gilly1984
          Badcaps Veteran
          • Jun 2012
          • 751
          • UK
          #3
          Re: Vizio VL320M replacement panel ?

          Whats the panel model number, i have a 32" tv that needs psu.

          Doubt it will be same panel but i'll check anyway.
          Do NOT touch heatsinks when testing for voltages as they may be LIVE!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • howardc64
              Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
              by howardc64
              Failure Symptom



              No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

              Where is the short?

              Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



              Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
              05-27-2025, 02:56 PM
            • howardc64
              Vizio M557-G0 1/2 panel VGHD LC1 (and maybe XON VSSQ LC2) Problems
              by howardc64
              Failure Symptom

              No Display. Just random blocks of grouped vertical red lines.
              Disconnect right 1/2 panel (rear view), left 1/2 displays properly

              Masking T-Con Signal Diagnostic

              Reduced masking to 5 signals on right 1/2 panel and get perfect picture

              Pins are

              1 GND
              2 VGHD
              3 XON
              4 VSSQ
              5 LC2
              6 LC1

              VGHD and LC1 masking is absolutely necessary to get working panel. Didn't unmask 3-5 individually.

              Pictures and Schematic

              XON, LC2, LC1 are on AUO s302-21 32pin QFN...
              10-14-2024, 01:30 PM
            • JayFixesIT
              LG 65UH9500 TV Panel replacement seal?
              by JayFixesIT
              Hi,

              I am in the process of replacing the backlight boards on the LG 65UH9500 TV. It requires the separation of the front glass/panel to get to the boards. The panel is help on to the frame with some kind of strips that I cannot reuse to adhere the screen to the frame. Anyone have any experience/Ideas on what I can use to securely hold the 65" Panel to the frame. I would hate for the panel to fall face forward. Thank you in advance....
              09-08-2024, 11:15 AM
            • frannyjunk
              Putting LCD panel from Vizio TV into another brand TV
              by frannyjunk
              I have a Vizio P502UI-B1 50" tv and baked the main board a little too much (to reflow BGA) resulting in a dead tv. I would like to use the Vizio LCD panel in another tv. Someone in the P502UI-B1 thread said he/she was able to take that Vizio LCD panel and put it into an LG 50UH5530 and it worked. Looking at the Tcon boards from the 2 tv's show different model boards (LG = EAMDJ2S55 while the Vizio tcon = V500DK2-CKS2). I have since looked up tv's that uses the V500DK2-CKS2 Tcon board (Hisense 50H7GB, Vizio P502-B1E & M50-C1, Westinghouse WD50UT4490, and a few others). Does this mean any...
              07-27-2021, 04:14 PM
            • NSkyLab
              Vizio D43f-J04 is panel dead?
              by NSkyLab
              TV Model: Vizio D43f-J04
              Main Board: TPD.MT5583.PB751 (60103-00876)
              T-Con: BOE_CC430LV2D_43001 V1.0
              Panel: BOEI430WU1

              The video of the defect is here: https://photos.app.goo.gl/fzfvmUqGXW3c1Nrg9
              This is a dumpster find, don't know if it was hit, there are no visible cracks...

              I though there may be something wrong with the panel voltages.
              Those I managed to find on the T-Con board. Does it seem normal?
              12V: 12.27v
              VCC33: 3.28v
              1.2V: 1.25v
              VGL: -5.87v
              AVDD: 16v
              HAVDD: 7.47v
              VCOM: 7.0v...
              01-29-2023, 08:18 PM
            • Loading...
            • No more items.
            Working...