LG 65UH9500 TV Panel replacement seal?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JayFixesIT
    Member
    • Aug 2024
    • 10
    • USA
    #1

    LG 65UH9500 TV Panel replacement seal?

    Hi,

    I am in the process of replacing the backlight boards on the LG 65UH9500 TV. It requires the separation of the front glass/panel to get to the boards. The panel is help on to the frame with some kind of strips that I cannot reuse to adhere the screen to the frame. Anyone have any experience/Ideas on what I can use to securely hold the 65" Panel to the frame. I would hate for the panel to fall face forward. Thank you in advance.
    Tags: None
    • EazyBone
      Badcaps Legend
      • Jun 2023
      • 1303
      • United states
      #2
      Picture? Didn't know LG glues screens down. You can use the same strip tape. On eBay put "LCD screen tape" and several options can show up.

        Comment

        • JayFixesIT
          Member
          • Aug 2024
          • 10
          • USA
          #3
          Originally posted by EazyBone
          Picture? Didn't know LG glues screens down. You can use the same strip tape. On eBay put "LCD screen tape" and several options can show up.
          Thank you! I was able to find the tape I needed. This TV is a borderless TV... The Glass is adhered to the metal frame with it.

            Comment

            • EazyBone
              Badcaps Legend
              • Jun 2023
              • 1303
              • United states
              #4
              Welcome. Yea I don't like these types of tvs. But gotta do what you gotta do!

                Comment

                Previous template Next

                Related Topics

                Collapse
                • mecha1166
                  Reattaching new edge to edge LCD panel to tv frame - Hisense 55a6g and others
                  by mecha1166
                  Some new tvs have an LCD screen attached to the outside of the frame with foam tape. These are "edge to edge" as they are called. I am trying to figure out how to reattach an LCD panel back up to the frame. The manufacturer used 3/16 inch foam tape along the top and rh/lh edges. I used a razor blade to separate the panel from the metal frame. The metal frame that the panel is taped to is 1/4 inch wide along the 2 sides and top. I completely removed the residue from the metal frame. There is some residue on the panel itself along the 3 edges, I removed almost all of it using alcohol and...
                  06-13-2024, 02:28 PM
                • howardc64
                  A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                  by howardc64
                  Problem

                  This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                  08-04-2024, 10:36 PM
                • triplefour
                  SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                  by triplefour
                  TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                  tcon is built into mainboard.
                  Only one cable goes to panel boards.
                  there is a cable from one panel board to the other that links them.
                  cost cutting measure that results in us having harder time to diagnose.
                  removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                  used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                  07-28-2022, 07:59 PM
                • Storyteller12
                  QN55Q60R Service Menu Panel Help
                  by Storyteller12
                  I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

                  I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

                  I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

                  the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
                  01-13-2024, 01:57 PM
                • maneatingmonkey
                  Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
                  by maneatingmonkey
                  I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

                  There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
                  ...
                  L Panel #1
                  11 Photos
                  03-27-2024, 07:17 AM
                • Loading...
                • No more items.
                Working...