I got a 50" Panasonic Plasma model th-50px75u that wont power up.
When I plug it, I can hear a click.
But after that if I press the power button, I just get a static red led, no blinking or nothing.
Any way, I got a troubleshooting diagram from scribd, and followed the steps for No power/ Dead Unit.
In pin 20 of D5 I got 3.0v
and in pin 11 of P25 I got 3.2v
So according to that diagram there is something wrong with the power supply. (power supply ETXMM655MEH )
I did a visual inspection, and I cant see anything obvious, and measured continuity in all the fuses I saw.
But thats about it, I dont know what else to look for.
Im attaching some pictures of the power supply.
Thank you in advance for your help, and kind attention.
When I plug it, I can hear a click.
But after that if I press the power button, I just get a static red led, no blinking or nothing.
Any way, I got a troubleshooting diagram from scribd, and followed the steps for No power/ Dead Unit.
In pin 20 of D5 I got 3.0v
and in pin 11 of P25 I got 3.2v
So according to that diagram there is something wrong with the power supply. (power supply ETXMM655MEH )
I did a visual inspection, and I cant see anything obvious, and measured continuity in all the fuses I saw.
But thats about it, I dont know what else to look for.
Im attaching some pictures of the power supply.
Thank you in advance for your help, and kind attention.
Comment