Panasonic TH42PH9 Half screen working

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • J-Man
    New Member
    • Aug 2012
    • 3
    • Netherlands
    #1

    Panasonic TH42PH9 Half screen working

    Hello all,

    I got a Panasonic TH42PH9 with only the right side is working.
    The left side has part white part black

    I checked the ribbons they seem to be Ok.
    And i replaced the D board .. also no effect

    maybe the C buffer? or did the panel failed?
    Tags: None
    • J-Man
      New Member
      • Aug 2012
      • 3
      • Netherlands
      #2
      Re: Panasonic TH42PH9 Half screen working

      anyone please?

        Comment

        • alexanna
          Member
          • Mar 2010
          • 1346
          #3
          Re: Panasonic TH42PH9 Half screen working

          This is out of a 46 Panasonic TV.
          I am not sure if it pertains to your model.
          Attached Files
          Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!

            Comment

            • J-Man
              New Member
              • Aug 2012
              • 3
              • Netherlands
              #4
              Re: Panasonic TH42PH9 Half screen working

              I have only 2 C buffers .. buy yea same idea
              i ordered an C buffer for that side, so lets hope that solves the problem ..

              If not .. what could it be then?

                Comment

                Previous template Next

                Related Topics

                Collapse
                • kca
                  LG 82UN8570AUD ~ TCON or PANEL?
                  by kca
                  Hello all ~

                  Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

                  When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

                  I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
                  08-31-2025, 06:38 AM
                • smic717394
                  MSI Optix MPG27CQ half screen working. Identify burned component
                  by smic717394
                  Hi,

                  I have a MSI Optix MPG27CQ screen to fix, only half screen is working, I found a burned chip on the right buffer board (S270DP01V00_HF_SR) but I can't read the model. Can anybody help?...
                  2 Photos
                  04-08-2025, 05:53 AM
                • valvashon
                  LG 55UH6150- trouble powering up, then half lit screen (pictures!)
                  by valvashon
                  The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
                  Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
                  11-24-2024, 12:08 PM
                • ravi_1617
                  HCL Laptop SCREEN SIZE SHRINK LEFT SIDE AROUND 2 INCHES
                  by ravi_1617
                  Hello to all ,
                  I have this HCL ME LAPTOP K 41 ,screen image is shrieked clock /speaker left side approx. 2 inches .Its 14.1 LCD SCREEN. I have replaced lcd screen ,found no difference
                  Its blank that area blank and bottom of Task bar is rolled at bottom displaying top portion image . In bios /setup also getting same problem
                  on external VGA port image is perfect /normal , Attached image...
                  07-25-2025, 12:07 AM
                • Raulnn
                  TD Systems K50DLG12US half black and half white screen
                  by Raulnn
                  good night! I have this screen that looks half black and half white. the tcon gives a low vgh value (5-6v). the rest seem fine. I first removed the flex from one half of the panel and then the other. Removing the left, vgh increases it to 25-26v. I think the problem is in that area, but there are not many elements on the integrated controller board. there are no shorted capacitors. could they be a cof? Some help?

                  By the way, now the entire screen is black. Maybe some flex was not connected correctly... I have exchanged the flex and there are no variations, I don't think they are the...
                  01-20-2024, 04:49 PM
                • Loading...
                • No more items.
                Working...