Philips lcd 42PFL5432D/37 screen problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sevenqi
    Badcaps Veteran
    • Jul 2011
    • 292
    #1

    Philips lcd 42PFL5432D/37 screen problem

    I repaired a Philips lcd TV model 42PFL5432D/37, no picture and sound, as I knew this is the known issue of the bad caps in the Power board, I repalced the 4 bad caps and TV came to work.
    However, there is a oval shape of white spot (a hat size) in the left bottom of the screen (It's brighter than other area), though I don't know if it's the problem before, or after, as I replaced the smaller caps (I replaced the half value of the original as I couldn't find the match values). The smaller value can lead to the white spot ? Any idea?
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: Philips lcd 42PFL5432D/37 screen problem

      Originally posted by Sevenqi
      as I replaced the smaller caps (I replaced the half value of the original as I couldn't find the match values).
      It is never a good idea to go too much higher or lower in capacitance. To get a 42 inch TV working, spend the extra $15 to replace ALL the electrolytic capacitors and the TV will last many more years.

      I can understand "cheaping" out if this was a crummy 15 inch 10 year lcd monitor.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        Previous template Next

        Related Topics

        Collapse
        • mmccomputer
          problem with replacing lcd screen
          by mmccomputer
          I have an HP model : 14-cf0011nf and I want to change its display screen (it has an original 14" full HD TN 30 pins panel) which works without problem but I want to put another screen with an IPS panel, the problem is that I tried several screens but there is no display except with the original screen, I never had this problem before I changed hundreds without problems but this PC is not 'accepted than its original screen
          otherwise on the motherboard it displays edp and I don't know, do the panels I tried only work with the LVDS protocol?
          If anyone has any information on the subject...
          12-15-2024, 03:44 PM
        • jimjoe123
          LCD TV Green/Pink screen problem
          by jimjoe123
          I have a Dick Smith 37" LCD TV, Model GE6804. I am using it as PC extended monitor only.

          Problem is while watching tv, I hear a semi loud click(like a electrical breaker tripping due to overload, just sound like it but no actual electrical overload), then screen is covered with green or pink. I can still see the original picture image but overlayed by green or pink. See attached images. Pink.jpg is what I see, and Normal.jpg is before green or pink screen, What I captured was pink screen, but about 80% of time it's green and 20% of time it's pink.

          Then each time...
          02-23-2020, 01:29 AM
        • janos6662000
          Philips 47PFS7509/12 LCD TV problem
          by janos6662000
          Hi

          I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
          When i applied cable signal to check image, i had normal picture, but TV was restarting.
          I downloaded original firmware and applied the update, but the problem remained.
          From a colleague i received a "factory package software" which is a lot bigger.
          I made another firmware update, but still did not solve the problem.
          Somewhere on the way the error got worse, because at the moment the...
          08-12-2025, 12:54 PM
        • Chrissygizmo
          Sony KD-55XG9505 lines on screen problem
          by Chrissygizmo
          Hello again everyone,

          This is my latest mission, to try getting this Sony tv back to normal working order…

          I've only just got it today, when you power it up everything is as should be, in fact it works perfectly for a few minutes then the screen starts getting horizontal lines on & eventually the full screen goes back, I will upload photos of the problem & also some photos of the board etc. You might notice that I'm busy trying the tape method, I'm not sure exactly where the clock lines are so I'm just guessing & hoping for the best lol . I've already tried...
          02-19-2025, 11:31 AM
        • reformatt
          Macbook Air M2 A2681 Kernel panics after screen replacement
          by reformatt
          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
          07-31-2025, 08:37 PM
        • Loading...
        • No more items.
        Working...