Baier 27" lcd screen keeps turning on and off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • maz
    Member
    • Nov 2011
    • 17
    • UK

    #21
    Re: Baier 27" lcd screen keeps turning on and off

    No Problem at least we are both clear what happened, i think i selected it when i was posting thread to receive emails. Thanks
    Last edited by maz; 05-29-2012, 03:03 AM.

    Comment

    • selldoor
      Slow Learner
      • Dec 2010
      • 7870

      #22
      Re: Baier 27" lcd screen keeps turning on and off

      Is this abandoned -were you waiting for some input?
      I think we are waiting for the results of the Torch Test and the pinpoint of which board (part of board) responds to heat.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

      Comment

      • maz
        Member
        • Nov 2011
        • 17
        • UK

        #23
        Re: Baier 27" lcd screen keeps turning on and off

        Thank you selldoor,

        I have been busy at work and at home and tried testing some components on the power board they were ok. only i could not figure out was the connector coming from power board to the main board is label for some pins to have 18V but i only get about the 4.3 or 5 volts, the rest of the pins have exact same volts as labeled.

        Thank you again for your input any ideas.
        sorry i have not been able to test the torch trick.

        Comment

        • selldoor
          Slow Learner
          • Dec 2010
          • 7870

          #24
          Re: Baier 27" lcd screen keeps turning on and off

          Hi - presumably the 18v was low when the tv was in error state.
          Can you test again when it is working. I really think you need to persevere with
          with the systematic hairdryer test and also the torch test as these will hopefully lead us to where the fault is based.
          Please upload pictures using attachment function when ask for help on the repair
          http://www.badcaps.net/forum/showthread.php?t=39740

          Comment

          • maz
            Member
            • Nov 2011
            • 17
            • UK

            #25
            Re: Baier 27" lcd screen keeps turning on and off

            Hi selldoor
            you were right i tried the torch and i could see the faded picture on the screen, so the picture is on the screen but there is no light, what do you think is bad invertor board or something else.

            Comment

            • selldoor
              Slow Learner
              • Dec 2010
              • 7870

              #26
              Re: Baier 27" lcd screen keeps turning on and off

              It seems like inverter board but could still be power supply.

              Did you say when you first switch on it takes up to 20 minutes to come on?

              If so please try the hairdryer again but only on the power supply and see if it comes on quicker.

              Have a video connected and playing so you know when it comes on.
              Please upload pictures using attachment function when ask for help on the repair
              http://www.badcaps.net/forum/showthread.php?t=39740

              Comment

              • maz
                Member
                • Nov 2011
                • 17
                • UK

                #27
                Re: Baier 27" lcd screen keeps turning on and off

                Hi Selldoor
                open to inverter board and used hair dryer on it and it is working ok without go off I think it is fixed will update if there is any problem I think there was a dry point on the inverter board, checked the voltage going to inverter board with screen on and off and they were stable there is a small cap on the board (SMD) I have a doubt about that but will see if problem occurs again thank you once again.

                Comment

                • selldoor
                  Slow Learner
                  • Dec 2010
                  • 7870

                  #28
                  Re: Baier 27" lcd screen keeps turning on and off

                  Ok - good luck - you know where we are if needed.
                  Please upload pictures using attachment function when ask for help on the repair
                  http://www.badcaps.net/forum/showthread.php?t=39740

                  Comment

                  • maz
                    Member
                    • Nov 2011
                    • 17
                    • UK

                    #29
                    Re: Baier 27" lcd screen keeps turning on and off

                    Thank you selldoor

                    Comment

                    Related Topics

                    Collapse

                    • reformatt
                      Macbook Air M2 A2681 Kernel panics after screen replacement
                      by reformatt
                      Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                      It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                      07-31-2025, 08:37 PM
                    • smic717394
                      iphone XS turns off when press on screen.
                      by smic717394
                      Hi,

                      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                      07-25-2024, 10:16 AM
                    • Chrissygizmo
                      Samsung UE55JU6800K half screen dark
                      by Chrissygizmo
                      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                      02-10-2025, 12:33 AM
                    • spice_disc
                      Vizio TV M50-C1 reboot cycle and static on screen
                      by spice_disc
                      I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                      The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                      09-08-2024, 02:37 PM
                    • ipatch
                      ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                      by ipatch
                      i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                      08-24-2024, 02:36 PM
                    • Loading...
                    • No more items.
                    Working...