lg rz_42py10x

[vinceroger69]

just been offered the above plasma set it has 2 coloured lines on the right side of the screen any ideas what the fault could be before i make him a offer on it. reading on line makes me think it maybe the control board at fault also could these lines being on the screen for a long time burnt into the plasma screen? so even if i fix the line fault the burnt area maybe visable?

[tom66]

Re: lg rz_42py10x

Could be panel, but I've seen loose driver connectors cause the same.

Yes, those lines could be burned in. I have seen it before.

[vinceroger69]

Re: lg rz_42py10x

cheers tom decided to give it a miss he would not budge from £60.00 looked for the main control board even on ebay well over £80.00 and reading this site looks like it was the board at fault.http://greenrenovation.wordpress.com...stripe-repair/
just been offered a Luxor 22 inch LCD TV / DVD with remote stand power lead etc it has a fault as when its on for over 15 mins the screen goes overbright if you turn if of and back on its fine for 20 mins any ideas?

[vinceroger69]

Re: lg rz_42py10x

the model number on the luxor is LUX-22-822-COB they say the pics ok for 10 mins or so then goes overbright/out of focus but if you turn if of its ok for a few minutes then goes bright/out of focus any ideas?

[tom66]

Re: lg rz_42py10x

cheers tom decided to give it a miss he would not budge from £60.00 looked for the main control board even on ebay well over £80.00 and reading this site looks like it was the board at fault.http://greenrenovation.wordpress.com...stripe-repair/
just been offered a Luxor 22 inch LCD TV / DVD with remote stand power lead etc it has a fault as when its on for over 15 mins the screen goes overbright if you turn if of and back on its fine for 20 mins any ideas?

No idea... maybe bad connection/solder joint... just guessing here.