Announcement

Collapse
No announcement yet.

sharp lc-32gd8e

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    sharp lc-32gd8e

    hello please can anyone advice me what my problem is in the attachment i have uploaded of my sharp lc-32gd8e .i have spent days trying to track down what part has gone or even what board needs replacing .i love bringing tv,s back to life for a hobby but tracking this fault down is like banging my head against the wall . as i cant seem to exsplain the fault properly .many thanks for your time in reading this painner
    Attached Files
    Last edited by painner; 08-11-2011, 05:38 AM. Reason: no attachment
    Tags: None
    #2
    Re: sharp lc-32gd8e

    Jennifer Aniston in a blue movie...?


    Sorry...
    System: HP xw6600 Workstation, 650W PSU | 2x Intel Xeon Quad E5440 @2.83GHz | 8x 1GB FB-DDR2 @ 667MHz | Kingston/Intel X25-M 160GB SSD | 2x 1TB Spinpoint F3, RAID0 | 1x 1TB Spinpoint F3, backup | ATI FireGL V7700 512MB | Sony Optiarc DVD +/-RW | Win 7 Ultimate x64 | 2x Dell UltraSharp U2410f | Dell E248WFP

    Comment

      #3
      Re: sharp lc-32gd8e

      Originally posted by dumpystig View Post
      Jennifer Aniston in a blue movie...?


      Sorry...
      No, her blue movie was 'The Break-Up.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

      Comment

        #4
        Re: sharp lc-32gd8e

        Originally posted by painner View Post
        hello please can anyone advice me what my problem is in the attachment i have uploaded of my sharp lc-32gd8e .i have spent days trying to track down what part has gone or even what board needs replacing .i love bringing tv,s back to life for a hobby but tracking this fault down is like banging my head against the wall . as i cant seem to exsplain the fault properly .many thanks for your time in reading this painner
        Maybe the T-Con board

        Comment

          #5
          Re: sharp lc-32gd8e

          Originally posted by plainbill View Post
          no, her blue movie was 'the break-up.

          Plainbill
          touche
          System: HP xw6600 Workstation, 650W PSU | 2x Intel Xeon Quad E5440 @2.83GHz | 8x 1GB FB-DDR2 @ 667MHz | Kingston/Intel X25-M 160GB SSD | 2x 1TB Spinpoint F3, RAID0 | 1x 1TB Spinpoint F3, backup | ATI FireGL V7700 512MB | Sony Optiarc DVD +/-RW | Win 7 Ultimate x64 | 2x Dell UltraSharp U2410f | Dell E248WFP

          Comment

            #6
            Re: sharp lc-32gd8e FIXED

            FIXED

            Unplug the AC power cord of running TV set to force off the power.
            i then pluged it back in macking sure tv is off then
            While holding down the left side of the the “VOL and p keys on the set with one hand i then help down the input button ( the round button ) and then
            pushed the power button holding all 4 buttons down at same time

            The letter “K” appears on the screen.
            and it enterd the service menu ( took me a few attempts but finnaly got it up )

            On the remote you use Cursor (UP / DOWN) to change the pages to 10/11
            look for EEP CLEAR B OFF. Use Program P (up/down) on remote to go up and down pages.
            THIS IS IMPORTED ONLY LINE 2 "EEP CLEAR B".
            Now change OFF to ON with Cursor (LEFT / RIGHT) and then press the OK button.
            After a couple of seconds you got a OK.

            look for the page with Inch Setting. It schould say 32, if not change it to 32
            and finally set Factory Init.which was above inch settings i set my to uk as live in uk
            and OK it after pressing the OK button, turn off the tv.
            Thats it

            Comment

              #7
              Re: sharp lc-32gd8e

              Nice one! How did you suss the above method?
              System: HP xw6600 Workstation, 650W PSU | 2x Intel Xeon Quad E5440 @2.83GHz | 8x 1GB FB-DDR2 @ 667MHz | Kingston/Intel X25-M 160GB SSD | 2x 1TB Spinpoint F3, RAID0 | 1x 1TB Spinpoint F3, backup | ATI FireGL V7700 512MB | Sony Optiarc DVD +/-RW | Win 7 Ultimate x64 | 2x Dell UltraSharp U2410f | Dell E248WFP

              Comment

                #8
                Re: sharp lc-32gd8e

                alot of searching and help from a couple of sites . the advice on how i did it was from another site but i had to change it as couldnt get into service mode there way for some reason as a box came up with public mode where you enter 3 word or number code and didnt know it .so i got into it the way i knew

                Comment

                  #9
                  Re: sharp lc-32gd8e

                  Originally posted by painner View Post
                  alot of searching and help from a couple of sites . the advice on how i did it was from another site but i had to change it as couldnt get into service mode there way for some reason as a box came up with public mode where you enter 3 word or number code and didnt know it .so i got into it the way i knew
                  Wonder if this will resolve my problem which is similar but involves the color green. Any help would be greatly appreciated.

                  Comment

                  Previous template Next
                  Working...
                  X