Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
painner
New Member
Last Activity: 11-11-2014, 03:04 AM
Joined: 08-11-2011
Location:
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Re: samsung UE32F5000AK led no backlight

    Many thanks found two blown leds jumped that strip to see if works and came on. so now just got to find where to get some spares in UK. Many thanks for you knowledge
    See more | Go to post

    Leave a comment:


  • Re: samsung UE32F5000AK led no backlight

    many thanks for all your help and very helpful advice will look forward to trying this out
    See more | Go to post

    Leave a comment:


  • Re: samsung UE32F5000AK led no backlight

    many thanks for very quick reply so does that mean one of the leds has gone and I have to track down which one . Don't mind taking it apart again had the led strips out the other day wanted to see what voltage they where because I wondered if I could send that voltage through each strip to check if they were blown
    See more | Go to post

    Leave a comment:


  • samsung UE32F5000AK led no backlight

    samsung UE32F5000AK led no backlight


    Hello I am wondering if anyone can give me some advice I have a Samsung UE32F5000AK when I turn it on the screen stays blank. I can hear the TV working fine and when I hold a bright torch I can see a picture so I think it's the backlight gone. Can anyone advise me how to fix this as I bought another power board and that didn't fix my backlight?
    See more | Go to post

  • Re: sharp lc-32gd8e

    alot of searching and help from a couple of sites . the advice on how i did it was from another site but i had to change it as couldnt get into service mode there way for some reason as a box came up with public mode where you enter 3 word or number code and didnt know it .so i got into it the way i knew
    See more | Go to post

    Leave a comment:


  • Re: sharp lc-32gd8e FIXED

    FIXED

    Unplug the AC power cord of running TV set to force off the power.
    i then pluged it back in macking sure tv is off then
    While holding down the left side of the the “VOL and p keys on the set with one hand i then help down the input button ( the round button ) and then
    pushed the power button holding all 4 buttons down at same time

    The letter “K” appears on the screen.
    and it enterd the service menu ( took me a few attempts but finnaly got it up )

    On the remote you use...
    See more | Go to post

    Leave a comment:


  • painner
    started a topic sharp lc-32gd8e

    sharp lc-32gd8e

    hello please can anyone advice me what my problem is in the attachment i have uploaded of my sharp lc-32gd8e .i have spent days trying to track down what part has gone or even what board needs replacing .i love bringing tv,s back to life for a hobby but tracking this fault down is like banging my head against the wall . as i cant seem to exsplain the fault properly .many thanks for your time in reading this painner...
    See more | Go to post
    Last edited by painner; 08-11-2011, 05:38 AM. Reason: no attachment
No activity results to display
Show More
Working...
X