Tv won't turn on. Not sure if there is a standby light on this TV but I'm not seeing any.
Checked the usual diodes that go bad and all test good. When plugged in 2 show 100v and the other 2 50v when plugged in.
Below is reading for CN6401
1) 0v - blinking
2) 0v - pwm1 dimmer
3) 0v - DC dimmer
4) 0v - 0wm2 dimmer
5) 3.5v - Standby
6) 0v - pwm3 dimmer
7) 0v - BL On
8) 2.6v BL Error
9) 3.5v PWR On
10-12,19-24) 0v - ground
13-18) 12v all pins - 12v reg
25) 0v - tcon vcc 12v
27-28) .5v - tcon vcc 12v
26) 0v - tcon on
Also I tested backlights with my tester and all pins show 119v. So assuming they're good but not positive since I get 2.6v on bl err pin.
I know a lot of these Sony have bad emmc also but not sure how to confirm if that's my problem.
Checked the usual diodes that go bad and all test good. When plugged in 2 show 100v and the other 2 50v when plugged in.
Below is reading for CN6401
1) 0v - blinking
2) 0v - pwm1 dimmer
3) 0v - DC dimmer
4) 0v - 0wm2 dimmer
5) 3.5v - Standby
6) 0v - pwm3 dimmer
7) 0v - BL On
8) 2.6v BL Error
9) 3.5v PWR On
10-12,19-24) 0v - ground
13-18) 12v all pins - 12v reg
25) 0v - tcon vcc 12v
27-28) .5v - tcon vcc 12v
26) 0v - tcon on
Also I tested backlights with my tester and all pins show 119v. So assuming they're good but not positive since I get 2.6v on bl err pin.
I know a lot of these Sony have bad emmc also but not sure how to confirm if that's my problem.
Comment