Ue55ks7000sxxn

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jimmy1979
    Senior Member
    • Apr 2015
    • 120
    • holland
    #1

    Ue55ks7000sxxn

    Hi,
    I have a picture problem with this tv.
    This panel is not with the famous resistors and diodes which go bad.
    Does anyone have experience with such a panel?
    i will attach photos.
    Thnx
    Attached Files
    Last edited by Jimmy1979; 06-14-2023, 10:43 AM.
    Tags: None
    • William1967
      Badcaps Veteran
      • Nov 2017
      • 215
      • Netherlands
      #2
      Re: Ue55ks7000sxxn

      Picture 1, the bars are not complete , there is a little part on the upper side without the bars, this looks to me like a faulty panel. Also the backlight in the lower part is to bright as if the Light Guide Plate is damaged/burnt.

        Comment

        • Jimmy1979
          Senior Member
          • Apr 2015
          • 120
          • holland
          #3
          Re: Ue55ks7000sxxn

          Originally posted by William1967
          Picture 1, the bars are not complete , there is a little part on the upper side without the bars, this looks to me like a faulty panel. Also the backlight in the lower part is to bright as if the Light Guide Plate is damaged/burnt.
          Oke thanx for the info. There is no repair for this issue.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • maneatingmonkey
              Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
              by maneatingmonkey
              I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

              There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
              ...
              L Panel #1
              11 Photos
              03-27-2024, 07:17 AM
            • iglitare
              Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
              by iglitare
              Hi,

              i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
              Backlight seems to work, Sound (Setup menu after reset) works.
              If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
              Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
              With my small knowledge i would think at least the cables are good.

              Can this happen because of a bad tcon board?
              Or is it always a bad/shorted...
              09-04-2025, 07:13 AM
            • EazyBone
              Un70TU7000b Backlights work, no picture, has sound, panel shorted caps
              by EazyBone
              Picked up this Samsung above thinking it'd be backlights but it isn't. Now MAYBE I'll get lucky.
              Found some shorted caps among the panel boards. Each cap along the line is shorted. On every board (3 panel driver boards)I disconnect each side right and left ribbons and they are no longer shorted caps and have about 1.5Mohm resistance (on left and right boards). The middle board has the main board disconnected and the caps are shorted. Last 4 pics show arrow to caps.

              Now what exactly do I need to do in order to attempt to fix this issue?

              do I have to take each one...
              10 Photos
              12-24-2023, 06:59 PM
            • howardc64
              LG 49UJ6500 LCD panel lighter band that goes away
              by howardc64
              49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

              Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
              02-19-2023, 12:13 AM
            • sigmeyer
              43UM7100PLB, no picture but have half picture when i disconnect 1 side of panel
              by sigmeyer
              Like the title says , this is a very interesting problem , never experienced this before so i thought i'd share and maybe get some help on this. So the problem is as such: TV comes on , some gibberish flashes on screen and the screen remains black , the owner of tv said he heard sound. Now i checked some things cleaned all connections first of all so i dont run in a circle. Then i disconnected one of the cables for the panel , and viola, the left side of screen comes on, then i tried to switch it , with left side disconnected and right connected. Same problem persists. I checked some voltages...
              09-09-2021, 10:30 AM
            • Loading...
            • No more items.
            Working...