QE65Q60T 1 HDMI not working possible after SPI 25Q80 update

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • alltvrepairs
    Badcaps Veteran
    • Jan 2014
    • 211
    • Malta

    #1

    QE65Q60T 1 HDMI not working possible after SPI 25Q80 update

    Hi,

    Have just replaced main board BN94-15427Q with a new board from exact same model buth uses a different version and panel. Have copied the SPI data from the original board and got rewarded with a perfect picture.

    1 of the HDMIs is not being recognized by any type of input. Strangely enough the faulty board had same HDMI slot faulty. I have factory restarted from service mode, upgraded software but still same issue.

    Before I open the set again can anyone confirm here if the SPI flash may contain HDMI related data?

    Thanks!
    Click image for larger version

Name:	qled.png
Views:	1
Size:	264.9 KB
ID:	2254634
  • alltvrepairs
    Badcaps Veteran
    • Jan 2014
    • 211
    • Malta

    #2
    Re: QE65Q60T 1 HDMI not working possible after SPI 25Q80 update

    bump
    Originally posted by alltvrepairs
    Hi,

    Have just replaced main board BN94-15427Q with a new board from exact same model buth uses a different version and panel. Have copied the SPI data from the original board and got rewarded with a perfect picture.

    1 of the HDMIs is not being recognized by any type of input. Strangely enough the faulty board had same HDMI slot faulty. I have factory restarted from service mode, upgraded software but still same issue.

    Before I open the set again can anyone confirm here if the SPI flash may contain HDMI related data?

    Thanks!
    [ATTACH]294944[/ATTACH]

    Comment

    • Diah
      Badcaps Legend
      • Feb 2013
      • 6342
      • Germany

      #3
      Re: QE65Q60T 1 HDMI not working possible after SPI 25Q80 update

      each Input Port assign with hex code at service menu... compare the ones which work with other didn't work and try if there are option to choice. or find same TV service menu and compare Option.

      Comment

      Related Topics

      Collapse

      • TheUser
        Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
        by TheUser
        Hello to everyone ,

        This is my first post here, and i would like to share with you a small story in case you can help me.

        Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

        All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

        I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
        02-10-2024, 02:07 PM
      • aliougm
        Marantz SR4003 AVR HDMI board issue, seeking for help
        by aliougm
        I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

        Connection as below:
        Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
        If I bypassed AVR then HDTV screen color be good.

        I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
        3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

        I replaced all...
        04-30-2022, 12:21 PM
      • japlytic
        Certain DisplayPort-HDMI cables can disable HDMI CEC communication
        by japlytic
        With a setup including a TV and AV receiver where HDMI Consumer Electronics Control (CEC) and Audio Return Channel (ARC) functions were working, these two functions stopped working after changing some connections (not the one between the AV receiver and TV), so I believed it was a corrupt setting in the AV receiver or TV, but when I disconnected a passive DisplayPort-HDMI cable (which a Multimode DisplayPort connector supports HDMI with a low cost passive cable or adaptor) connected to a home theatre PC, HDMI CEC and ARC functionality was restored.
        An examination of the HDMI CEC wiring...
        07-10-2022, 09:48 PM
      • akwky
        Fixed: Lenovo P14s Gen 1 (type 20Y1, 20Y2) Laptop (ThinkPad) bricked by a withdrawn BIOS update (r1buj82w)
        by akwky
        Hi!
        Went dumpster-diving and found a bricked Lenovo P14S in trash, few weeks earlier. Symptoms - no screen, no POST, no beep, just keyboard LEDs flashing on powerup. Mute button+LED was responding though, and the display self-test was still working (via the key combo Ctrl+Fn+Power held for some seconds, see the Service manual).

        Incidentally, Windows 11 have recently started auto-flashing computer BIOS in our region. Even more suspiciously, Lenovo has released a BIOS update just few days before the PC was trashed. About a week later, the BIOS update image has been oficially marked...
        04-14-2025, 01:56 PM
      • spleenharvester
        Toshiba 50UL2063DB randomly rebooting with HDMI-CEC and/or HDMI-ARC enabled
        by spleenharvester
        I have this TV hooked up to only an AppleTV 4K and a Creative soundbar. Originally HDMI-CEC and HDMI-ARC wouldn't work at all, I replaced all the HDMI cables with decent UGREEN cables meeting the latest standards, now it all works perfectly but once or twice a day the TV itself reboots while watching a program, the AppleTV keeps running. I haven't fully pinned down whether it is ARC or CEC causing it yet. All are running latest firmware.

        I assume it is just HDMI-CEC being buggy as usual on a shitty Vestel machine, but can anyone think of anything I can try before disabling it?
        03-12-2025, 03:42 PM
      • Loading...
      • No more items.
      Working...