Tab Bond repair Philips TV

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nicke74
    Member
    • Mar 2023
    • 16
    • sweden
    #1

    Tab Bond repair Philips TV

    Hello guys

    I have a philips TV where we accidently managed to damange one of the tab bond from the panel.
    Maybe not the best picture but one part of the ribbon have come loose.
    As far as I understand those ribbons are attached with special glue but since the majority of the ribbon still is attached I wonder if it is possible to solve the issue by myself or shoufl I judge this as a scrapped panel.
    The TV is only 4 year old and I was fixing another problem in the TV when I accidently damanage this connection.

    When reading the forum I think some guys have managed to fix similar problem but I do not find any guide how

    Anyone which could give me some advise
    Attached Files
    Tags: None
    • Diah
      Badcaps Legend
      • Feb 2013
      • 6363
      • Germany
      #2
      Re: Tab Bond repair Philips TV

      now days ACF type make this repair easy.. even to replace complete COF ribbon with out need for bonding machine. DIY heat rubber head enough to do the job.
      you can find on aliexpress 10 m for less 15$

        Comment

        • nicke74
          Member
          • Mar 2023
          • 16
          • sweden
          #3
          Re: Tab Bond repair Philips TV

          Hello, thanks.

          Since I never have one this, could you maybe link to aliexpress which product I need.
          I suppose I will then find some guides at youttube exacty how to perform the job..

          If I understodd correctly I need this rubber head for my solidering iron and this special tape. I guess the hardest part will be to attached it on exactly the correct position.

          Sorry for maybe stupid questions
          I tried to search in the forum but didnt find any good post to ready about this..

            Comment

            • Diah
              Badcaps Legend
              • Feb 2013
              • 6363
              • Germany
              #4
              Re: Tab Bond repair Philips TV

              ACF type for COF bonding are easy to search , i would never play advertised to any of Chinese seller as i missed the trust on them long time ago.

              about rubber heating head.. i wrote DIY its mean you can use depending on your ability and fantasy any type of heating method which don't mild the ribbon surface when you apply the heating even if it was infrared wave

                Comment

                • nicke74
                  Member
                  • Mar 2023
                  • 16
                  • sweden
                  #5
                  Re: Tab Bond repair Philips TV

                  Sorry. I didnt menat you should recommend any seller.
                  More for me to understand the difference since I found different marking of the tape

                  Some examples

                  New Date ACF AC-7206U-18 TAPE
                  New Date ACF AC-7246LU-18 TAPE
                  New Date ACF AC-4713SY-18 TAPE

                  etc

                  For the head I found something like this which cost just i few €.

                  2pcs/Set Soldering Iron T Tip T-head,Copper T-Tips + Rubber Cable Hot Press For LCD Screen Pixel Flex Cable Repair 30W 60W 40W

                  For cleaning I suppose aceton could be used...

                  Anymore advise to manage this...

                    Comment

                    • Diah
                      Badcaps Legend
                      • Feb 2013
                      • 6363
                      • Germany
                      #6
                      Re: Tab Bond repair Philips TV

                      you did managed it self go head and report urs work successful. about ACF AC-7246LU-18 TAPE 2.0 mm will be fine

                        Comment

                        • nicke74
                          Member
                          • Mar 2023
                          • 16
                          • sweden
                          #7
                          Re: Tab Bond repair Philips TV

                          Thanks . I will order the stuff and will ofcourse update in a few weeks when the delivery has arrived

                          Do I need to completly have to disconnect the the damaged cable, or will it be enought/possible disconnect on the "broken" side, clean, add tape , and heat under presssure ?

                            Comment

                            • Diah
                              Badcaps Legend
                              • Feb 2013
                              • 6363
                              • Germany
                              #8
                              Re: Tab Bond repair Philips TV

                              of course need to do clean work from start,,, but don't miss to remark the place of attached ribbon to have exact clean works

                                Comment

                                • nomoresonys
                                  Badcaps Legend
                                  • Jan 2013
                                  • 12146
                                  • U.S.
                                  #9
                                  Re: Tab Bond repair Philips TV

                                  Has anyone here done this with success lately, just curious, saw it done on youtube, looked like a tough job.

                                    Comment

                                    Previous template Next

                                    Related Topics

                                    Collapse
                                    • G33RT
                                      Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                                      by G33RT
                                      Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                                      It does power up when pressing the power button.

                                      I already try the power button while plugin the plug with no result.
                                      Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                                      Could this be an PSU or eMMC issue ?
                                      07-19-2025, 03:43 AM
                                    • Rubenlily
                                      Quick question about the ribbon
                                      by Rubenlily
                                      Hey,

                                      So I have horizontal lines on my TV and I'm trying to trouble shoot. My question about the ribbon is:

                                      When I disconnect one ribbon from the t-con I should get half picture working and other half black or something like that correct? But when I disconnect the ribbon on one side I just get a dark screen and it doesn't matter what side I disconnect. I just get the dark screen. No half working, no one half black and the other one left. Sound is playing from the TV so it's obviously on and when both sides are connected I have the picture with the horizontal lines...
                                      08-17-2023, 11:09 AM
                                    • Tr0ll
                                      T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                                      by Tr0ll
                                      Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                                      The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                                      Original T-con:
                                      Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                                      First replacement T-con:

                                      I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                                      10-07-2023, 07:48 PM
                                    • aidanmo
                                      Philips 43PUS7506/12 - Loud blown out sound
                                      by aidanmo
                                      Hello,

                                      I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
                                      I thought maybe the speakers got damaged, so I replaced them - no dice.
                                      • Using the internal speakers, it always happens.
                                      • Using the headphone jack, it never happens.
                                      • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
                                      ...
                                      02-28-2025, 03:13 PM
                                    • Scincidae
                                      UN70NU6900FXZA Won't Boot Unless I Temporarily Disconnect Right LVDS Ribbon
                                      by Scincidae
                                      I recently was given a UN70NU6900FXZA that would only boot loop once plugged in (auto powers on when plugged in). I found that disconnecting the lower (right side) LVDS ribbon, then plugging the TV in, followed by reconnecting the lower LVDS ribbon will allow the TV to work 100% normal as far as I can tell (no lines, no discoloration, no dimming or anything like that).

                                      I tried the tape method on the lower LVDS ribbon and found that if I cover pins 10 and 11 (counting from the bottom up) allows the TV to boot normal but 25% screen all the way to the right side is discolored. While...
                                      04-24-2022, 06:00 PM
                                    • Loading...
                                    • No more items.
                                    Working...