Have a Samsung UE558000, which I thought was just going to be a straightforward backlight replacement, as the screen was dark in the middle.
After stripping it down, I noticed it was exactly the same lights out on both sides (see pic)
I tested the strips with LED tester, and no bulbs were out, so I tested the voltage going to the strips, both at the board side, and at the strip.
On Blue, there is 30.5v on pin 3 and 9, but nothing on the others.
Same situation on White, 30.5v pin 2 and pin 8
All caps look ok, anyone any idea?...
Comment