Samsung UE43J5500: Replacing main board by another model or screen size

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • madyoyo
    Member
    • Aug 2018
    • 12
    • france

    #1

    Samsung UE43J5500: Replacing main board by another model or screen size

    Hi everybody;

    The main board (bn94-09121q) on my UE43J5500 is dead. I can't find the exact same board for a reasonable price, but some other part numbers are pretty cheap, they are physically identical, and based on the bn41-0235 board

    Can i swap the bn94-09121q by another "letter", like a bn94-09121N, or even from anoter screen size?
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12210
    • U.S.

    #2
    Re: Samsung UE43J5500: Replacing main board by another model or screen size

    what is the full model code on the back cover of tv?

    Comment

    • Rajnhl
      Senior Member
      • Oct 2018
      • 94
      • India

      #3
      Re: Samsung UE43J5500: Replacing main board by another model or screen size

      you can use any board that supports panel's resolution. most board support lvds mapping setting and mirror image setting in service menu.

      Comment

      • madyoyo
        Member
        • Aug 2018
        • 12
        • france

        #4
        Re: Samsung UE43J5500: Replacing main board by another model or screen size

        Originally posted by nomoresonys
        what is the full model code on the back cover of tv?
        eu-43j5500awxzf

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12210
          • U.S.

          #5
          Re: Samsung UE43J5500: Replacing main board by another model or screen size

          not 100 percent sure, but I think that bn94-09121N will work for you.

          Comment

          • alfatv
            Badcaps Veteran
            • Sep 2020
            • 353
            • Canada

            #6
            Re: Samsung UE43J5500: Replacing main board by another model or screen size

            J series service menu has a long list of panels, so just find yours and select it. Especially if image is upside down, you need to go through this step.

            Comment

            Related Topics

            Collapse

            • Lee M.
              Samsung UN75RU8000FXZA bad main board?
              by Lee M.
              When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
              11-08-2023, 07:46 PM
            • JDC
              (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
              by JDC
              ONN 100012588
              Issue: No Power, Then Rebooting After Main Board Change

              Short answer: replace main board and power board
              Technical answer: replace main board and Q306 & Q307 on power board.

              Long answer:

              TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
              07-15-2022, 07:39 AM
            • advant
              Driving a Sharp TCON/panel with a universal main board
              by advant
              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
              02-03-2020, 12:25 AM
            • NizNoz
              Replacing Main Board on One Connect Samsung
              by NizNoz
              Hi. I'm busy troubleshooting my Samsung Frame TV UN65LS003 on another thread, but I had a separate question I'm hoping someone here may have an answer for.

              The service manual states that after replacing the main board you should "change the factory option. The options you must change are 'Type'." I've linked the service manual (page 57). It also states you should "change option bytes when replacing Main Board".

              The only change I made was going to service menu -> Option -> Type -> 65A1AUOKM

              That's all I did. I checked firmware...
              05-16-2021, 03:04 AM
            • C152Heavy
              Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
              by C152Heavy
              Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

              Summary for TL-DR readers:
              • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
              • Have obtained Samsung schematic & service documents - Can upload if helpful.
              • Have read ALL applicable threads
              • C1818 and CP820 replaced as low hanging fruit
              • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
              • VCC pin (18) of PFC...
              01-11-2023, 02:53 PM
            • Loading...
            • No more items.
            Working...