Announcement

**c_hegge** · 02-24-2010, 03:53 AM

Re: Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

I usually use Panasonic FC in PSUs, although they are a bit bigger physically and you may have trouble fitting them in. Nichicon HE, Chemi-con KZE and KY, Rubycon YXF and WXA would probably be fine as well, although all will probably be bigger than the Fuhjyyu originals.

**emplosion69** · 02-24-2010, 04:35 AM

Re: Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

Thanks for the reply

So the Fuhjyyu originals are the only size that fits as manufactured..hmm well looks like a fit mod re-cap then lol..

none the less its worth it as I have been testing all the volts across my board tonight,
I have one molex connection that is for fan only x 2 that gives only 4.76.

ok after a quick search I found this ..

Panasonic FC..

and right after that is this..are these better for this ??

Steve

**370forlife** · 02-24-2010, 05:03 AM

Re: Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

https://www.badcaps.net/store/produc...products_id=56

Samxon RS series, 16v, 3300uf 10mm caps. They are perfect for psu's because their ESR isn't too low (having too low of ESR in a psu can actually cause more ripple)

https://www.badcaps.net/store/produc...products_id=57

Second verse, same as the first but these are 10v caps, you can replace the 2200uf's with 3300uf's as long as there is room height wise. Only problem is topcat is all out of them.

**emplosion69** · 02-24-2010, 05:28 AM

Re: Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

Only problem is topcat is all out of them

Just my luck and I was thinking I could order these today, if not I'll have to wait until next week, work etc..

Checking out Digikey is like W0W..has a butt crack load of everything to figure in to get what you want, didnt know that these little legged cans could be so many choices of them.

EDIT:. as I look at the Panasonic, I seen the M in the box on them as that is what is on the 200V 1200uf main in (I guess that is the mains)

CAP 3300UF 16V ELECT FC RADIAL Panasonic I see how the size is bigger I'll deal with that after I get these
http://search.digikey.com/scripts/Dk...name=P10260-ND

CAP 2200UF 10V ELECT FC RADIAL
http://search.digikey.com/scripts/Dk...name=P11189-ND

**emplosion69** · 02-24-2010, 06:09 AM

Re: Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

And here is the rest, I hope these are all good to go for this re-cap, I need to order some other resistors and "pots" also so I'll just do it there too..make a bulk order out of it get the most of my few bux

**goodpsusearch** · 02-24-2010, 06:24 AM

Re: Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

Panasonic FK are the smallest you can find to replace the Fuhjyyu caps.

FK is good series but expensive (at least were expensive at rs store)

FM is better than FC, if you can get FM go for it.

Try to check the diameter of all the original caps and then look for same diameter good ones.

My antec story here: https://www.badcaps.net/forum/showthread.php?t=8223

Announcement

Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

Antec true550 ESp12V Recap - need help with replacement caps (have all info needed)

Comment

Comment

Comment

Comment

Comment

Comment