icute psu

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • krazykev64
    Member
    • Feb 2009
    • 49

    #1

    icute psu

    has anyone ever used or came across the icute psu's sold at maplins in the UK. i have the 700watt version of the one in the picture. quiet psu and no problems so far. its modular as well. do thay have any problems
    Attached Files
    Last edited by krazykev64; 08-12-2009, 05:06 PM. Reason: no picture
  • 370forlife
    Large Marge
    • Aug 2008
    • 3112
    • United States

    #2
    Re: icute psu

    UL certification on the label, but no UL number, that makes it a little suspicious.

    It apparently does have APFC by the voltage input. Already miles ahead most crap brands, but its quality is unknown. The finish and fan grill looks suspiciously like my HEC Zephyr.

    How much did it cost?

    Comment

    • Krankshaft
      Badcaps Legend
      • Jan 2007
      • 2328
      • USA

      #3
      Re: icute psu

      Probably you have 700 Watt (peak) that just what I can take for a millisecond before it blows up.

      In any case I wouldn't trust the ratings without a look inside. A forged UL listing doesn't earn any of my confidence on how accurate the label is.
      Elements of the past and the future combining to make something not quite as good as either.

      Comment

      Related Topics

      Collapse

      • jean luc ferre
        laptop hp g72 b52sf screen problems
        by jean luc ferre
        Hello,
        on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
        the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
        i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
        i don't understand the reasons of the white stripe at the bottom of the screen below the task...
        06-07-2025, 03:27 PM
      • Hondaman
        USB problems?
        by Hondaman
        Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

        (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

        I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
        08-12-2024, 03:26 PM
      • clabr
        Lenovo 11e problems (any sata hdds are not recognized, sleep battery drain)
        by clabr
        Need help to solve some problems with this laptop.

        After working in bed with it one night and heating up too much (probably the cause of this problems) the sata HDD OS windows froze
        After restart the original Sata HDD was not recognized anymore (but works fine in other laptops or PCs)

        Tried connecting other good Sata 2.5 HDDs but not one is working in this laptop anymore (not the original nor others)

        Before this had happened I observed some other problems:
        When I tried replacing original mecanical HDD with a SSD HDD could not get them...
        12-02-2021, 08:09 AM
      • rumpumpel1
        Lenovo X13-Yoga Gen 1: hibernation problems
        by rumpumpel1
        I have a Lenovo X13-Yoga Gen 1 that has problems with hibernation mode. When the laptop goes to hibernation mode - either via the start menu or after a time-out - after a short period of activity where the power-on LED flashes, the power consumption should go down to almost 0 and the LED should go out. Most of the time, however, the power consumption indicates further CPU activity and the power LED remains on, but there is no image. Sometimes the CPU activity stops after a few minutes, sometimes not at all. If the laptop enters this state, it can only be brought back to life by a long press on...
        11-03-2024, 12:31 AM
      • howardc64
        Vizio M557-G0 1/2 panel VGHD LC1 (and maybe XON VSSQ LC2) Problems
        by howardc64
        Failure Symptom

        No Display. Just random blocks of grouped vertical red lines.
        Disconnect right 1/2 panel (rear view), left 1/2 displays properly

        Masking T-Con Signal Diagnostic

        Reduced masking to 5 signals on right 1/2 panel and get perfect picture

        Pins are

        1 GND
        2 VGHD
        3 XON
        4 VSSQ
        5 LC2
        6 LC1

        VGHD and LC1 masking is absolutely necessary to get working panel. Didn't unmask 3-5 individually.

        Pictures and Schematic

        XON, LC2, LC1 are on AUO s302-21 32pin QFN...
        10-14-2024, 01:30 PM
      • Loading...
      • No more items.
      Working...