Announcement

Collapse
No announcement yet.

Fixing goontrons warped PSU

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Fixing goontrons warped PSU

    To start off, Blackberry camera shots... I miss the pictures i could take my moto G...







    I went over the board to look for broken traces, none found despite it being warped. It seems to be one of the more decent Topower designs and fairly high efficacy. So I decided I would fix it. I have found replacements for the caps (Matsushita) but i've hit a stumbling point. There are two 50v caps. One 47uF and one 22uF, im not sure if they are both startup caps or not. If they are I want to substitute the 22uF for a 47uF. Does this sound OK?
    Last edited by goontron; 02-07-2017, 10:13 PM.
    Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

    "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

    Excuse me while i do something dangerous


    You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

    Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

    Follow the white rabbit.
    Tags: None
    #2
    Re: Fixing goontrons warped PSU

    Deleted post

    Comment

      #3
      Re: Fixing goontrons warped PSU

      I think there are 22 and 47uf tantalums, haven't tried it before but it could work if you don't find lytics, the warped board is nothing to be worried I the traces are OK, I have 2 working PSUs like that and basically all my Mobo's because they are cheap e.e

      Comment

        #4
        Re: Fixing goontrons warped PSU

        It doesn't look like a 750w more like a 500w psu

        Comment

        Previous template Next
        Working...
        X