CORSAIR RM1000 - help needed!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Monument
    Member
    • May 2011
    • 40
    • Estonia

    #1

    CORSAIR RM1000 - help needed!

    Hello,

    Got a Corsair RM1000 PSU that kicked off main fuses in the building, found the fault but cant identify the diode, see the pictures below:





    If anyone could provide me some schematics, would be thankful!
    Attached Files
    Last edited by Per Hansson; 10-30-2016, 04:42 AM. Reason: Offsite images uploaded
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31002
    • Albion

    #2
    Re: CORSAIR RM1000 - help needed!

    if he face has blown off, it's still in there somewhere - give it a good shake.

    Comment

    • Monument
      Member
      • May 2011
      • 40
      • Estonia

      #3
      Re: CORSAIR RM1000 - help needed!

      Originally posted by stj
      if he face has blown off, it's still in there somewhere - give it a good shake.
      There are no pieces, its been burned off I think.

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 31002
        • Albion

        #4
        Re: CORSAIR RM1000 - help needed!

        no, it split - i'm sure of it.

        Comment

        • Monument
          Member
          • May 2011
          • 40
          • Estonia

          #5
          Re: CORSAIR RM1000 - help needed!

          Originally posted by stj
          no, it split - i'm sure of it.
          Nowhere to be found, searched for an hour, whats the purpouse of this diode`? Why did it make such a power outtage in the whole building?

          Comment

          • stj
            Great Sage 齊天大聖
            • Dec 2009
            • 31002
            • Albion

            #6
            Re: CORSAIR RM1000 - help needed!

            no idea, you have to trace the tracks.
            it may be the pfc circuit.

            Comment

            • japlytic
              Badcaps Legend
              • Oct 2005
              • 2086
              • Australia

              #7
              Re: CORSAIR RM1000 - help needed!

              It is the PFC rectifier, and two power MOSFETs for the PFC boost stage are near this rectifier - one possible match for this rectifier could be an ST STTH8L06.
              My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.

              Comment

              • kc8adu
                Super Moderator
                • Nov 2003
                • 8832
                • U.S.A!

                #8
                Re: CORSAIR RM1000 - help needed!

                if you get it running replace the secondary caps.i see crap.

                Comment

                • Quasam
                  New Member
                  • May 2015
                  • 2
                  • Norway

                  #9
                  Re: CORSAIR RM1000 - help needed!

                  It's c3d10060
                  DIODE SCHOT 600V 10A

                  Now I need som help from you.
                  On the bottomside of the main pcb.
                  Could you read off numbers\values on the following components:
                  R508
                  R507
                  R510
                  R511
                  R514
                  R509
                  These and F3NK80Z (q501) got blown\cooked in a water damage incident.
                  Any help appreciated

                  Comment

                  • Ositronix
                    New Member
                    • Jun 2018
                    • 1
                    • Nigeria

                    #10
                    Re: CORSAIR RM1000 - help needed!

                    hey guys, i am new to badcaps.net and need your help on the rm1000 power supply unit. the power supply got fried and on opening it. i found a burnt capacitor and a varactor(not so sure, the component in front of the diode with reference to the picture) leaving the fuse ok. i changed the burnt components and visually everything seems ok. but its not powering up. i need your help asap. thanks.

                    Comment

                    • Stefan Payne
                      Badcaps Legend
                      • Dec 2009
                      • 1267
                      • Germany

                      #11
                      Re: CORSAIR RM1000 - help needed!

                      start with making pictures and uploading it to this forum...

                      Comment

                      • rayhan
                        New Member
                        • Nov 2018
                        • 1
                        • Bangladesh

                        #12
                        Re: CORSAIR RM1000 - help needed!

                        if i replace it..it will be ok..?

                        Comment

                        Related Topics

                        Collapse

                        Working...