Monument
Member
Last Activity: 04-15-2017, 03:04 AM
Joined: 05-12-2011
Location:
-
I have posted a reply in your thread about corsair RM1000 psu. -
Re: CORSAIR RM1000 - help needed!
Nowhere to be found, searched for an hour, whats the purpouse of this diode`? Why did it make such a power outtage in the whole building?... -
Re: CORSAIR RM1000 - help needed!
There are no pieces, its been burned off I think....Leave a comment:
-
CORSAIR RM1000 - help needed!
Hello,
Got a Corsair RM1000 PSU that kicked off main fuses in the building, found the fault but cant identify the diode, see the pictures below:
If anyone could provide me some schematics, would be thankful!... -
Re: Alpine TDA7592R - no signs of life
Here are some images:...Leave a comment:
-
Alpine TDA7592R - no signs of life
Hello, I got an Alpine TDA7592R with no signs of life at all, I checked all diodes and they seemed ok to me, also the capacitors near power input doesnt charge at all + the power doesnt reach front panel. The external DC/DC converter reads under 1V input. Any tips to look into? -
Re: GeForce GTX 680 no display/beeps 8 times
Motherboard is Asus Rock 980DE3/U3S3 with a CPU AMD FX-8320, tried the fan with 7.4v 1.3mAh turnigy Li-Po and it wont turn on at all.
I also made pictures of the card....Last edited by Monument; 11-28-2015, 05:19 AM.Leave a comment:
-
Re: GeForce GTX 680 no display/beeps 8 times
The motherboard is beeping 8 times (Display memory error). So i must connect the 8 pin connector only? I have one 6 pin and one 8 pin connector. I tried connecting separately and together all the pins but the card is not working, even the fans are not spinning.Last edited by Monument; 11-25-2015, 11:08 AM.Leave a comment:
-
GeForce GTX 680 no display/beeps 8 times
Hello,
I have got a video card (Gigabyte Geforce 680 GTX) from my cousin that makes 8 beeps and wont display anything, even the vents are not spinning at all. I´ve already tried reflowing the GPU with SMD hot air station with no luck, PSU is 620watts and can power high end video cards very well. If anyone can help me, it would be much appreciated! -
Re: FORD 2007 RDS stopped working after cleaning buttons!
I think I´ll give up, I just cant find the fault, maybe the buttons are bad.Leave a comment:
-
Re: FORD 2007 RDS stopped working after cleaning buttons!
They are not "Tact" switches, they are like the ones in TV-remotes, rubber and circuit.Leave a comment:
-
FORD 2007 RDS stopped working after cleaning buttons!
Hello folks,
Recenlty got a Ford 2007 RDS radio which had coke spilled on it, only the power button worked. I took it apart and cleaned all the buttons with alcohol, after assembly the radio would not turn on anymore. I checked the fuses, diodes on the mainboard but no luck.
There is one thing though, the "tuner" block on the mainboard gets very hot, I havent opened it yet because I need to resolder the frame first.
What went wrong? Im confused. -
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
Yes, it didn't fix the keyboard, however, the laptop seems to work just fine, external keyboard is also working fine so I assume the keyboard is malfunctional.Leave a comment:
-
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
I think the resistor is R349 with a value of 1Mega ohms.Leave a comment:
-
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
One end of the resistor should be in contact with the transistor. I believe the motherboard code is [B]dagc3amb8[/B] and I read
"KXTC8
20020
1511"
on U26 chip.Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
One end of the resistor should be in contact with the transistor. I believe the motherboard code is [B]dagc3amb8[/B] and I read
"KXTC8
20020
1511"
on U26 chip.Re: Lenovo SL510 Keyboard issue - bad unidentified resistorLeave a comment:
-
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
I took out the resistor, it was very oxydated, couldn't tell the value, even the surrounding PCB is a bit damaged....Leave a comment:
-
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
I am out of ideas.Leave a comment:
-
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
No sir, it's not. When I check for an example "R345", the values are different from the ones in this pdf file.
Here's the image of this area....Last edited by Monument; 11-30-2013, 10:34 AM.Leave a comment:
-
Re: Lenovo SL510 Keyboard issue - bad unidentified resistor
I can't find the schematics anywhere.Leave a comment:
-
Lenovo SL510 Keyboard issue - bad unidentified resistor
Hello, recently got a Lenovo SL510 laptop. The laptop had a coffe spill, I cleaned it up, put it back together, the keyboard worked just fine. After the laptop had not been used for two weeks, the keyboard stopped working. So I took it apart again and removed the stickers on the motherboard to find any residue. What I found was bad, the coffe got under one sticker and was already "eating" the components, I cleaned the board with a toothbrush and alcohol and found a resistor that was not working and looked very bad, I can't identify the value of the resistor, or maybe it's a small SMD...
No activity results to display
Leave a comment: