LEPA G1600-MA voltage drops under load

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ciki022
    Member
    • Nov 2013
    • 48
    • Serbia
    #1

    LEPA G1600-MA voltage drops under load

    Hello,

    Mentioned PS, LEPA G1600-MA, without load works fine, giving 12,25 V. But, under load, voltage drops to 10,5 - 10,8 V, and computers works 30 seconds to 1-2-5 minutes and then reboots.
    And the voltage drop same when one graphic card is attached or more.
    Everything looks normal, no bulged caps, no burnt out parts, what should I first check ?

    Link to this PS
    http://vr-zone.com/articles/lepa-g16...w/17999.html/4

    Thanks in advance

    Goran
    Last edited by ciki022; 01-26-2016, 12:16 PM.
    Tags: None
    • Stefan Payne
      Badcaps Legend
      • Dec 2009
      • 1267
      • Germany
      #2
      Re: LEPA G1600-MA voltage drops under load

      Only the +12V rail drops?
      What about +5VSB?

        Comment

        • Behemot
          Badcaps Legend
          • Dec 2009
          • 4845
          • CZ
          #3
          Re: LEPA G1600-MA voltage drops under load

          What do you measure with and where?
          Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

          Exclusive caps, meters and more!
          Hardware Insights - power supply reviews and more!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • Instafixx
              Macbook A2179 820-01958
              by Instafixx
              Hi,
              Have a Macbook A2179 with liquid damage. Customer showed it some shop which has done an ultrasonic cleaning of the board.
              The board pulls 0V but doesnt turn on. No Fan SPIN. NOT IN DFU.

              I checked the Power Sequences below and found this -


              Once a valid external power source (Charger or battery) is connected, the following rails will come online.
              PPBUS_G3H: Normal voltage is ~12.6v on the charger with the battery disconnected. Produced from the ISL9240 (U7000, which uses PPDCIN_G3H as its VIN.
              PP3v3_G3H_RTC: Normal voltage is ~3.3v. Produced...
              05-20-2023, 05:19 AM
            • rddube
              Lenovo L490 Ram voltage circuit malfunction
              by rddube
              Hello friends,

              Looking for some guidance here. The RAM voltage circuit on this motherboard keeps burning out PU301 which is a RT8231AGQW. Copy of the board with the burnt chip attached with some voltage measurements and copy of the schematics also included.

              I think I've checked almost every component in the circuit, but when I change the RT8231, the laptop starts I have 1.2V on the inductor for about 10 seconds and then the RT8231 goes south and no more voltage on the inductor. All other voltages on the laptop are good, this is the only one conking out for a reason I...
              07-15-2025, 04:41 PM
            • Fernon@Repair
              Gigabyte Z490 Gaming X Motherboard No VCORE Voltage
              by Fernon@Repair
              i have Gigabyte Z490 Gaming X Motherboard .it has a power on no display fault .. no vcore voltage and debug led stuck CPU LED .

              VCCIO voltage ok
              VCCSA Voltage OK
              VCCPLL Voltage OK
              Ram Voltage ok
              RamVTT OK
              VPP 2.5 OK

              But No Core Voltage

              and i want to this vrm ic datasheet or pinout (ISL69269)
              anyone have this ic pinout voltages?...
              06-25-2025, 07:19 AM
            • electron_jj
              Panasonic TH-L42D25A checking the PSU output voltage
              by electron_jj
              Hi Everyone, I am new to this forum. I have a Panasonic LED TV which doesnt turn on and is blinking 4 times repeatedly when I turn on the switch. The TV does not respond to the remote control so I had to turn on using the physical switch on the side of the TV. When I turn on the switch the 4 x blinking starts and repeat itself until I turn off the TV. There is a black screen. I turned off the light in the room to check the panel and I think there is no backlight as far as I can tell.

              I have been inspecting and testing the capacitors and diodes in the power supply board to try to...
              08-29-2021, 08:13 AM
            • Loading...
            • No more items.
            Working...