Dead Dell All-In-One PS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GoneGault
    Senior Member
    • Sep 2013
    • 105
    • United States

    #1

    Dead Dell All-In-One PS

    I have a Dell All-In-One with no signs of life. I have 120ac coming into the power supply, with no dc volts coming out. It has a proprietary 18pin atx connection, and a replacement ps costs more than the computer is worth. I see no obvious bloated caps or burn spots on the power supply board. Space is tight and power supply appears to be harder than average to work on. Output voltages are marked on the power supply board.
    Question: as long as I match up the voltages and jerry-rig a connector, can I use a regular atx power supply to test the computer?
    2nd Question: I have repaired a decent number of power supplies, lcd tv's and monitors. Should I attempt to repair the power supply?
    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Dead Dell All-In-One PS

    Are you getting 120VAC on the two inner pins of the bridge rectifier?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31051
      • Albion

      #3
      Re: Dead Dell All-In-One PS

      under the chip in the upper left corner, someone has made a mess of the soldering.

      an atx supply should be o.k. - compare the pinout - you may be able to just plug it in with the side of the connector overhanging.
      check the pinout first though.

      other than that, get datasheets for the chips - look for startup capacitors and change them.
      and see what's hiding under the heatsink.

      Comment

      • GoneGault
        Senior Member
        • Sep 2013
        • 105
        • United States

        #4
        Re: Dead Dell All-In-One PS

        Budm, if the bridge rectifier is in red in this picture, the two inside pins have 0 voltage.
        Attached Files

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #5
          Re: Dead Dell All-In-One PS

          Sounds like you have blown main fuse.
          At the AC inlet, the center pin is Ground, the other 2 pins when you use Ohm meter between one of the inner pins of the bridge and one of the pin of the AC inlet, it should show <1 Ohm, do the same test on the other pin of the inlet, it should also show <1 Ohm. Basically each of the AC inlet pins (Hot and Neutral) should have continuity to the two inner pins (AC1, AC2) of the bridge.
          The fuse may be cover with black shrink tubing.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • GoneGault
            Senior Member
            • Sep 2013
            • 105
            • United States

            #6
            Re: Dead Dell All-In-One PS

            Budm, you are right...the main fuse is blown. I have order replacements and will report results when they arrive.

            Comment

            • GoneGault
              Senior Member
              • Sep 2013
              • 105
              • United States

              #7
              Re: Dead Dell All-In-One PS

              I replaced the main fuse; it immediately blew again. I then used a fuse with a higher amperage and it also blew.

              Comment

              • c_hegge
                Badcaps Legend
                • Sep 2009
                • 5219
                • Australia

                #8
                Re: Dead Dell All-In-One PS

                ^
                That always happens. Fuses never blow without something else causing it to blow. Sounds like you might have a shorted PFC transistor and/or coil.
                I love putting bad caps and flat batteries in fire and watching them explode!!

                No wonder it doesn't work! You installed the jumper wires backwards

                Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

                Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

                Comment

                Related Topics

                Collapse

                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  11-22-2024, 01:46 PM
                • Andreas_de
                  Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
                  by Andreas_de
                  Hello!

                  i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
                  Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

                  Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
                  ...
                  04-12-2025, 10:38 AM
                • sam_sam_sam
                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                  by sam_sam_sam
                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                  03-31-2024, 02:12 PM
                • Francesc V.
                  Dell dockstation WD15 is dead
                  by Francesc V.
                  Hi:

                  A friend gave me this DELL WD15 dockstation that does nothing. Not detected by computer, no digital output.........just leds shines when it’s plugged in.
                  Here are the findings, followed by good pictures. :-)

                  When pluged in, LED3 glows
                  Measuring some voltage in the circuit.


                  Inductors
                  - PL202 has 5V
                  - PL201 has 3.3V
                  - PL300 has 1V

                  V. Regulators
                  - UT30 has 19v as input and 6V as output. It seems ok.
                  - UT27 (same reference as UT30, has no input/output voltage).


                  Thermal find...
                  07-09-2025, 12:12 AM
                • kevin_allein
                  Samsung QE 75 Q 7 FGMTZG Power Supply dead
                  by kevin_allein
                  Hi, have this Samsung QE 75 Q 7 FGMTZG TV with no function. First analysis shows the power supply board is dead and fuse blown. Power Supply has the number BN94-11439A. I did short circuit test transistor and diodes and those do not appear to have shorts. I must admit I did not look at every single data sheet.
                  In the TV was some black dust residue, so probably one of the electrolytic caps blew, but they do not show short either.

                  Does anyone have schematics for that board ?
                  Any good tip, what could be the issue ?
                  02-27-2025, 12:15 PM
                • Loading...
                • No more items.
                Working...