Hi, New member here. I have searched for help with my question and although I have found a bit of helpful posts I still need some guidance.
I have a power supply (EAY3723110 ?) out of a LG 42LC7D TV that has 6 bulged caps. I plan on replacing all the caps with something of higher quality (Rubycon probably). I am relatively new to replacing these component level parts although I have done by fair share of soldering etc so I'm up for the job.
I made a list of all the caps and went to order from digikey when I ran into a problem. The caps have the UF and Voltage listed, some with temp, but none of them seem to have ripple current and Impedance listed. When ordering I have narrowed my selection down but still have a choice of about 4 different ripple current and Impedance choices.
Any guidance would be greatly appreciated on the matter. I can list the caps if need be.
Thanks!
I have a power supply (EAY3723110 ?) out of a LG 42LC7D TV that has 6 bulged caps. I plan on replacing all the caps with something of higher quality (Rubycon probably). I am relatively new to replacing these component level parts although I have done by fair share of soldering etc so I'm up for the job.
I made a list of all the caps and went to order from digikey when I ran into a problem. The caps have the UF and Voltage listed, some with temp, but none of them seem to have ripple current and Impedance listed. When ordering I have narrowed my selection down but still have a choice of about 4 different ripple current and Impedance choices.
Any guidance would be greatly appreciated on the matter. I can list the caps if need be.
Thanks!
Comment