I tried ordering from digikey and they want me to send a copy of my drivers license to prove who I am. I'm not comfortable with that. For a $16.00 order. I'll try Mouser, thanks....

Thanks! I'll order some new ones. General purpose, 105C, 2200uF. On my way to ebay... ...

Thank you for your response. I'd found the data sheet prior but I'm still very much in a learning phase......

Will low ESR hurt in this case? The schematic is attached in my first post if that helps.. Thanks!...

Good day!

I have a Samson Resolv studio monitor that has no sound output. I've opened it up and found two caps that are bulging on what I believe to be the power supply section of the amplifier board. The board is marked Resolv 65A AMP V1.2. The caps in question are YUSCON, 2200uF, 35V, 85C temp and have markings of RA(P) and are 16mm x 25.5mm tall. I've attached the schematic and the caps in question are C5 and C6. I'm assuming they are low esr caps. I've tested both caps and they test low uF, nowhere near 2200uF.

I'm going to replace the caps and I'll be the first...

Greetings all!

I started teaching myself electronic repair about 2 years ago. While learning the basics I took a detour into ham radio for a while. Ham radio offers many opportunities for building your own gear and that meshed well with my love of creating things. Well, I'm back on the road for learning electronic repair and found my way here from a youtube video about electronic components and repair.

I hope to learn enough to be able to contribute here in the future.

Kind Regards,
Fleet