Someone may have asked this already, but...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ncovert
    Badcaps Veteran
    • Feb 2011
    • 291
    • USA

    #1

    Someone may have asked this already, but...

    What are some quality power supply BRANDS? I already know some, such as:
    Delta/Newton
    Fortron (FSP)
    Sparkle Power Int'l, Ltd. (Some are built by FSP)
    Sea Sonic
    Corsair
    Etc.
    If someone has asked this already, please politely tell me and I will relocate.
  • ncovert
    Badcaps Veteran
    • Feb 2011
    • 291
    • USA

    #2
    Re: Someone may have asked this already, but...

    I have already found my answer. No need to comment

    Comment

    Related Topics

    Collapse

    • Loki_Fido
      (Weird) BIOS info for HP Pavilion Aero 13-be1021AU
      by Loki_Fido
      Hi folks,

      This HP Pavilion Aero 13-be1021AU came to me for a repair. And it seems to have a weird BIOS chip. (Pic attached)
      I asked my CH341A to read it and doesn't even know what to do with this. We are both very confused.

      BIOS - XMC 25RU128CH10 (1.8v)

      What the heck is this? I looked all over the MB. This is the only bios.
      When I asked the NeoProgrammer to detect it, it just pops up an empty screen, and asked me to enter the bios number. And when I did, it doesn't do anything. NeoProgrammer showed me just this SPI ID: 204418. Don't know what...
      03-20-2025, 01:57 AM
    • Fam787
      HELP! A1398 Dead,
      by Fam787
      I bought a second hand Mid 2014 A1398 MacBook Pro when I lived in Australia. I'd bought it as a back-up machine because I had a Mid 2014 MacBook Pro, and realising it might one day fail, I wanted a backup machine because I don't like change.

      Two weeks after buying MBP2, the seller called me to check if everything was OK with the unit, which I thought was odd. At that stage I might have turned it on a couple of times, but I'd not used it when he'd called. Over the last few years I used the machine seldomly because my original mac has been pretty OK. Every 3-6 months I'd charge it...
      12-27-2024, 05:19 PM
    • claws77
      lenovo flex 5 14ITL05 bios and motherboard fault
      by claws77
      my laptop is lenovo flex 5 14ITL05

      recently my power supply for this laptop developed a fault.
      which caused a short in my usb c port -- verified with a new charger.

      rant: so, i went to the repair tech in my country, he asked for a huge repair cost when i decided to get it done someplace else this "great person" nicked my bios chip, asked me to be aware for repair scams lol.
      I was stupid and unable to find the flaw at the moment. Another repair tech told me that my bios chip was stolen and an 8mb bios chip is in place of that. he told me that a 32...
      07-05-2024, 04:33 PM
    • Rav_tangle
      MacBook Pro 2011 turns on with keyboard light , screen dead
      by Rav_tangle
      Hi all , thanks for having me & I think this has been asked before but my case seems a bit odd.
      I have a MacBook Pro , board 820-2915a and it turns on , chimes etc etc , keyboard lights up, fans spins , can turn caps lock on/off but screen is dead.
      Iv tried the resets , shine torch through back logo , nothing , it seems the screen has no power. If I plug charger , it charges but if I disconnect battery it displays green light but won't turn on. Iv tried screen on with another board & it works & seems I'm not getting any voltage at pin 2 , next to ground pin .
      is this...
      05-31-2024, 04:09 PM
    • sordids999
      Backlight halos 55PUS6754/12
      by sordids999
      Good evening

      Recently i have been asked to change the backlights on this set,but in the past ive done a set of this model and even with a brand new set of leds im still getting the halo effect on the screen once fitted.
      any ideas what's causing this ?
      Had a few philips recently been asked to do the backlights but try to steer clear from these philiips tvs
      thanks
      03-11-2024, 08:55 PM
    • Loading...
    • No more items.
    Working...