820-02098 and 820-02443 brd and sch files

[DjSvoy]

Re: 820-02098 and 820-02443 brd and sch files

.PDF file in the fist post...

[oiamife]

Re: 820-02098 and 820-02443 brd and sch files

Thanks for sharing. Appreciate this a lot.

[formerunicornbroker]

Re: 820-02098 and 820-02443 brd and sch files

Sorry to awake an old thread but any luck with the schematics for 820-02098-A anyone?
Thank you for the brd file!

[Pedro147]

Re: 820-02098 and 820-02443 brd and sch files

Not sure why some of you cannot see that both ZIP folders contain both .bvr board files and PDF schematics for both logic boards (820-02098 and 820-02443) They are both there, see here https://*******/a/Nhw8zaF

[nhattamlaptop]

Re: 820-02098 and 820-02443 brd and sch files

OpenBoardView supports BVR3 files.
Here are the original BRD files anyway.

thanks very much

[alekk89]

Re: 820-02098 and 820-02443 brd and sch files

The zip files do not contain pdf
The size of the downloaded zip files is 275kb and 306kb, not 5mb as shown in the post.


Edit:

Tried it on my mac as well, same situation. After triend multiple times it finally downloaded a 5mb version of the file

[adnanabay]

Re: 820-02098 and 820-02443 brd and sch files

Nice job. Thank you.

[emiryang]

Re: 820-02098 and 820-02443 brd and sch files

this is great but there is no pdf. Could you please supply the pdf I just found the broken part and I would like to know the part spec to order and then i can see can i recover my motherboard.

[germanjo]

Re: 820-02098 and 820-02443 brd and sch files

thanks!!!!

[n24688]

Re: 820-02098 and 820-02443 brd and sch files

The zip files do not seem to have any pdfs in them. Does anyone have the schematics pdf?

[Vesko356]

Re: 820-02098 and 820-02443 brd and sch files

The zip files do not seem to have any pdfs in them. Does anyone have the schematics pdf?

Read posts #22 and #25

.

[joen_d66]

Re: 820-02098 and 820-02443 brd and sch files

many..manyy..thank to pedro147 & piernov..

[firulilla]

Re: 820-02098 and 820-02443 brd and sch files

thanks a lot for pedro147 and piernov,, this helps a lot

[assokou]

thanks so much

[Saratoga MicroSoldering]

Thank you for the files!!

[MAREBELE]

Sorry to open this old thread again, but i cant open the brd file using allegro or eagle
Need this beause i have hole in my board
theres eror like this.

what software do you use, is it possible the file is corrupt

many thanks

[TTTHINK]

Sorry to open this old thread again, but i cant open the brd file using allegro or eagle
Need this beause i have hole in my board
theres eror like this.

what software do you use, is it possible the file is corrupt

many thanks

Hi, I'm opening a BRD file from another HP laptop with the same two programs as you and I'm running into the same error as you. Can you please tell me how to solve it.

[MAREBELE]

Hi, I'm opening a BRD file from another HP laptop with the same two programs as you and I'm running into the same error as you. Can you please tell me how to solve it.

Sorry but i still haven't figured why this file cant be opened, do you have any progress?

[piernov]

https://github.com/OpenBoardView/Ope...ses/tag/9.95.0

[MAREBELE]

https://github.com/OpenBoardView/Ope...ses/tag/9.95.0

Hi,this version of openboardview does open The BRD file, but what iam hopping to see from the brd file is the motherboard internal layer because there a hole in my motherboard and and it penetrate 12 internal layer, and this doesn show the internal layer but only where the point connect to

or perhaps maybe the BRD file didnt countain the internal layer ?

Thanks,