Need:macbook pro A1990 boardview+schamtic
Hi
Need boardview +Schematic
Macbook A1990 Touch Bar Macbook Pro 2018 15.4
Thanks
Need boardview +Schematic
Macbook A1990 Touch Bar Macbook Pro 2018 15.4
Thanks
-
-
Re: Need:macbook pro A1990 boardview+schamtic
Did you ever find these? I need them too
-
Re: Need:macbook pro A1990 boardview+schamtic
820-01041 not available yet. Have to be patient.
Only the 13" leaked for now, 820-00850, but no one shared it for free yet apparently.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: Need:macbook pro A1990 boardview+schamtic
How do I attach the filesComment
-
Comment
-
Re: Need:macbook pro A1990 boardview+schamtic
Been posted here btw.
https://www.badcaps.net/forum/showpo...43&postcount=4OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
MacBook Pro 15" A1990 Touch Bar 820-01814-01, 820-01814-A, 820-01814-B Schematic...10-08-2024, 01:46 AM
-
mb code:820-01827-A;
sn:C02Z349ALVDR;
i9 32GB Ram 1TB
Hi, I found short on one of 6 black nand (total 1TB).
i removed all 6 nand ( voltages all ok) and now i want to program with JC P15 but for A1990 2019 there is only 512GB configuration.
I try A2141 1TB configurazion with TSB4228 but the position on pcb is different ( U9300 and U9400 is no stuff on A1990 but present on A2141 and U8800 and U8900 is no stuff on A2141 but present on A1990 )
macbook with A2141 configuration run on recovery but don't complete it.
anyone can help me?05-26-2025, 09:27 AM -
Hello,
I am currently working on a Macbook Pro A1990 (motherboard 820-01041) which is not charging.
The Macbook consumes 5V and 0.019A at USB-C. There seems to be a partial short-circuit on the PPBUS_G3H rail as I have 0V on this rail.
I've physically separated (by removing F7000 and F7001) PPBUS_G3H and the ISL9240 charging chip to see which side the short is coming from. Removing these fuses gives me 12.6V at the output of the ISL chip (PPVBAT_G3H_CHGR_REG).
However, I can't work out exactly why I don't have the PPBUS_G3H rail.
Here are the values... -
Hi i have one Macbook Air 2020 where touch ID is not working (it's not scanning fingerprints). Touch ID was working before, there is no error message during scanning fingerprint it's just not scanning on screen you can see only fingerprint but there are no red updates as when it's working. Power button is working fine.
I've checked boardview and also schematics but i'm not able to find anything related to TouchID ... i have similar issue on a2338 where there was problem with PP3V0_TOUCHID and after replacing UT610 it was working but here i'm not able to find anything related to... -
I have a a1990 2018 15 inch MacBook Pro that will not power on.
I have replaced the pch bga chip because it was heating up under my thermal camera.
I have replaced the battery, and replaced the small ic between the gpu and cpu as it had a direct short to ground.
the MacBook now pulls 20v 2.4amps the trackpad clicks but it does not ever attempt to power on not even fan spin. After PCH replacement I was able to get it in dfu mode 1 time and restore bridge OS, but now the MacBook will no longer go into DFU mode.
I have also noticed L7030 gets extremely hot yet...
Comment