Looking for a detailed picture of a MacBook Air A2337 820-02899-A motherboard

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TChainz
    New Member
    • Aug 2022
    • 4
    • United States
    #1

    Looking for a detailed picture of a MacBook Air A2337 820-02899-A motherboard

    A friend of mine was trying to replace one of the TI chips shown in the picture and managed to shuffle quite a few components around. I'm trying to put this puzzle back together, but without the schematics/boardview for this revision I'm flying blind. I've scoured the web for a good picture of this board, but to no avail.
    If anyone has one of these boards (820-02899-A) and would be willing to post a close-up of this section, I would be eternally grateful.
    2 Photos
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • rounin
      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
      by rounin
      Hi everyone,

      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

      🛠 Original Issue
      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
      04-19-2025, 01:18 AM
    • obelix24
      Macbook Air M1 a2337 - 820-02016
      by obelix24
      I'm working on Macbook air a2337

      It's stuck on 5V.

      I've replaced both CD3217B12 IC's and U8100

      When i connect USB-C ampmeter i'm getting 5V 0.01 - 0.4a and restart ampmeter and again ....

      I tried to connect to another mac and i'm not able to get it to DFU.

      history is that this macbook just died randomly and owner was not able to start it again.

      PPBUS_AON is 12.3V
      i'm missing PP5V_S2 - 0V

      According to repair wiki i've checked https://repair.wiki/w/MacBook_Air_A2...current_draw_c...
      11-07-2025, 07:13 AM
    • Adogabriel100
      where to get trusted CD3217. Problem with A2337 Macbook Air
      by Adogabriel100
      Hey! As the title says. i don't know if this is the right place to ask but i need to get trusted USB C Controllers (CD3217-CD3215) For macs and dont know where to get them. i dont know if you guys know where is a good place to get it.

      The thing is that i have a Macbook air A2337 M1 and i dont have a donnor board to get the CD3217. So i try the CD3217 from a A2141 Board and at first, whitout his eprom it does not convert 5v to 20v. then i put the original CD3217 eprom from the A2141 and then the macbook A2337 conver the 5v to 20v but still not turning on. i guess that the CD3217 is...
      09-06-2024, 12:06 PM
    • Kristion
      Recognising an item on a MacBook Pro 13" 2020 A2251 motherboard
      by Kristion
      Hi there, I had a MacBook Pro 13" 2020 A2251 at work, and it suddenly stopped working without having being bad to it (I ride my bike everyday though). I replaced the motherboard so now it works again, but with other data. I would like to repair the 661-15938 motherboard. I spotted where it burned, I saw that there is a post where there are the 820-01949 pdf and bvr but I don't know what to do with it. I tried to install OpenBoardView because it seems like it's what I should use to have a look at the schematic view of my motherboard. But I failed:

      But surely some people on this...
      08-13-2024, 11:46 AM
    • Skrndelj
      Apple Macbook Air M1 A2337 Trackpad problem
      by Skrndelj
      Hello all,

      I am repairing a Macbook A2337 and i have a problem
      The Macbook is stuck in restore as someone before me tried a DFU restore and bricked the device, now i can't do a restore as AC2 throws error 1 which is related to the trackpad.
      When i turn on the device i get the trackpad click for a few moments and then nothing, i tried 7 trackpads and 7 trackpad flats, i know all 7 are functioning okay, especially one as i use it for testing and DFU restore.
      I inspected the whole board and everything seems fine.
      Can anyone help me as i didn't fiddle with trackpad...
      06-11-2024, 04:26 AM
    • Loading...
    • No more items.
    Working...