already unlocked my seft.thanks alot
Need unlocked bios for Getac S410 G2
Collapse
X
-
-
Can you help me unlock bios pass Getac s410 g2 i7-8550 s\n RJ903S0172Attached FilesComment
-
Attached FilesComment
-
Please help me remove the BIOS password from my Getac S410 G2.
I have found two SPI flash chips next to the memory slots. One is a Winbond chip, which seems to be an 8MB flash. I can't read from this chip, it seems to be protected.
The other is a Macronix MX25L12873F 16MB flash. I have successfully dumped this flash and hope this is the right one.
Model: GETAC S410 G2 INTEL I7 8650U
SN: RK603S2602
MOTHERBOARD: TF1-TH-PCB PWA-S410G2 ASSY.411886200134-kAttached FilesComment
-
Please help me remove the BIOS password from my Getac S410 G2.
I have found two SPI flash chips next to the memory slots. One is a Winbond chip, which seems to be an 8MB flash. I can't read from this chip, it seems to be protected.
The other is a Macronix MX25L12873F 16MB flash. I have successfully dumped this flash and hope this is the right one.
Model: GETAC S410 G2 INTEL I7 8650U
SN: RK603S2602
MOTHERBOARD: TF1-TH-PCB PWA-S410G2 ASSY.411886200134-kAttached FilesComment
-
Hi,
Is it possible to dump the GETAC S410 G2 BIOS in-circuit, or do I need to desolder the chip?
I have now done 3 in-circuit dumps and compared them. Each time, there are significant differences.
I want to be sure I have a valid dump of the chip before flashing the unlocked binary.
Maybe my CH341A is defective.
I have ordered a new one, the Geieold Programmer CH341A​, I will try again with this programmer..
Comment
-
Hi,
Is it possible to dump the GETAC S410 G2 BIOS in-circuit, or do I need to desolder the chip?
I have now done 3 in-circuit dumps and compared them. Each time, there are significant differences.
I want to be sure I have a valid dump of the chip before flashing the unlocked binary.
Maybe my CH341A is defective.
I have ordered a new one, the Geieold Programmer CH341A, I will try again with this programmer..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..​Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Normally, I work on a Lenovo, where the clip works fine.
Could someone please confirm which is the right chip?
The left one, Winbond,
or
The right one, Macronix?
​1 PhotoComment
-
With my new CH341A V1.7 programmer, I was able to get a valid dump of the Macronix MX25L12873F. The clip works fine for dumping in-circuit.
Please help me remove the BIOS password from this file.
The PC data is still the same:
​
Model: GETAC S410 G2 INTEL I7 8650U
SN: RK603S2602
MOTHERBOARD: TF1-TH-PCB PWA-S410G2 ASSY.411886200134-k
THANKSAttached FilesComment
-
With my new CH341A V1.7 programmer, I was able to get a valid dump of the Macronix MX25L12873F. The clip works fine for dumping in-circuit.
Please help me remove the BIOS password from this file.
The PC data is still the same:
​
Model: GETAC S410 G2 INTEL I7 8650U
SN: RK603S2602
MOTHERBOARD: TF1-TH-PCB PWA-S410G2 ASSY.411886200134-k
THANKSComment
-
With my new CH341A V1.7 programmer, I was able to get a valid dump of the Macronix MX25L12873F. The clip works fine for dumping in-circuit.
Please help me remove the BIOS password from this file.
The PC data is still the same:
Model: GETAC S410 G2 INTEL I7 8650U
SN: RK603S2602
MOTHERBOARD: TF1-TH-PCB PWA-S410G2 ASSY.411886200134-k
THANKSAttached FilesLast edited by volinakis; 01-17-2025, 02:26 AM.----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Thanks, I was able to remove the BIOS password using your file! (without the need for desoldering the chip)Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
Related Topics
Collapse
-
by Forest79Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...-
Channel: BIOS & Schematic Requests!
-
-
by maanee11Hello Everyone,
I have Thinkpad T560 Which has corrupted BIOS. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need a bin file for the BIOS. I was able to extract the .exe file of BIOS from Lenovo given here in this link:
https://pcsupport.lenovo.com/au/en/p...me=BIOS%2FUEFI
In the extracted files, I see that BIOS containing file has extension .FL1 and I need to extract or convert it...-
Channel: BIOS Requests ONLY!
-
-
Hello to all of you! I need help with a BIOS file.
The BIOS chip is fried on my Asus F542UN laptop, and I bought a new chip that needs programming. I have a CH341a programmer but I need a .bin BIOS file. On Asus support page the firmware has another extension, .310 and from reading on this forum I understand that that file is not complete BIOS.
So, in short I need the "complete" BIOS .bin file to flash on the new chip. Another issue is that on back of the case the label says F542UN but on the sticker on the motherboard it's X542UN.-
Channel: BIOS Requests ONLY!
-
-
by Fr33manHello everyone,
I soft BRICKED my Lenovo IdeaPad laptop (black screen with led lights on, responsive keyboard backlight, fans spinning) after messing about with a Github tool called Smokeless. I am now attempting to reflash the bios through USB, but I am not sure if I extracted the correct BIOS ROM file to flash, and I also could not find the correct file name to rename it to (GLCrisis.bin, GLCN.bin, Currom.bin??). In addition to attempting to reflash the Bios with a USB, I have also performed the following activities:
*Novo button power on
*Disconnected internal battery...-
Channel: BIOS Requests ONLY!
-
-
by iZakreHello everybody!
To put you in context I recently replaced the battery from my HP Pavilion 15 bc400ns with a used one, everything was going good. The same day, I decided to update the BIOS, everything went good. The thing occurred after I let the battery drain iddling on Windows 11 for the second time to calibrate it that the screen did not turn on again, the computer was on but the screen did not turn, like it would not wake from hibernation. I decided to restart the computer but got no video.
The thing is that I had installed TeamViewer and could log into the computer... - Loading...
- No more items.
Comment