request bios for tongfang MB GK5CN6X V 1.1

[armand666]

request bios for tongfang MB GK5CN6X V 1.1

[SMDFlea]

Re: request bios for tongfang MB GK5CN6X V 1.1

request bios for tongfang MB GK5CN6X V 1.1

Post the full laptop model number and your bios backup

[armand666]

Re: request bios for tongfang MB GK5CN6X V 1.1

Attached bios file and laptop model

[pooya_pm]

Re: request bios for tongfang MB GK5CN6X V 1.1

attached bios file and laptop model

gk5cn6x rev1.1 u8 & u20 working bios

[armand666]

Re: request bios for tongfang MB GK5CN6X V 1.1

thank you

[luisvalenzuelajr]

BIOS Clear ME Avell MB GK5CN6X V1.1

Good morning, please I need a CLEAR ME in my BIOS.

Attached is my backup, plss

[vovanduuken]

Re: request bios for tongfang MB GK5CN6X V 1.1

Hi. CLEAR ME in my BIOS . I can't clean it out.

[Vesko356]

Re: request bios for tongfang MB GK5CN6X V 1.1

Hi. CLEAR ME in my BIOS . I can't clean it out.

Read the rules before posting:
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570

.

[vovanduuken]

Re: request bios for tongfang MB GK5CN6X V 1.1

Hello, Admin. My laptop model is Maibenben Jingang T6. It's a Chinese hodgepodge, but the motherboard costs GK5CN6X REV. 1.1. I managed to clean the me region. if anyone needs it, I used Intel CSME SYSTEM TOOLS v12 r9 and installed Visual C++Redistributable Runtimes 2005-2022

[tesnic]

Hi all!! Thanks in advance for you support. I'm repairing these laptop, first it didn't boot but at least the RGB keyboard light up and some leds also. I make a bakup of the EC and the BIOS, to try another bios, but now it dont do anyhing, any led, with backup bios & ec neither... ;-( Is for that reason, i searrch an EC and BIOs good fles to reprogram it by the Ch341a programmer.

Mechrevo Laptop
Model X8Ti Plus
MB GK5CN6X v.1.1
GTX 1060 and I7 8750H

Thanks!!!

[SMDFlea]

Thread merged with tongfang GK5CN6X V 1.1 thread. Post your backups and laptop serial number -> https://www.badcaps.net/forum/troubl...before-posting

[tesnic]

Thanks SMDFlea I upload my bios & ec backup and the serial number into the chasis is 419039JZ1930330019. I upload also the photos of the MB, the serials on the chasis and the box of the laptop.

[tesnic]

Any help guys? Thanks!

[tesnic]

If someone can help me with it please.... thanks!

[hoaca388]

If someone can help me with it please.... thanks!

There is no bios on the mechrevo.com homepage

[tesnic]

No....

[Woody78]

Hi all, I hope everyone is well! 😉 I've not been on fir a while, but I've started doing some repairs in my spare time again and I'm looking to refresh my knowledge of bios and flashing etc. When I used to do it there was one bios chip, and that was it, but now there are multiple chips on the boards, and I've no idea why, or what the difference between them is?? 😵💫 so if anyone could give a brief refresher I'd really appreciate it! 🙏 🥹

Anyway, I have a gaming laptop GK5CN6ZGK, PC Specialist, which wont power on, light comes on then back off again! Ive done all the normal checks, reset bios, reseated ram, tried different ram, checked board under microscope for burnt/discoloured components etc, I've had multimeter on it and it seems all power rails are present and as yet I've found no shorts? I've disconnected everything from the mobo, including the power button board, leaving just the fans plugged in, then powered it up by shorting the pins on power board connecter, same thing happened, so I'm a bit stumped tbh, I know it could be a cpu, or gpu issue, as its quite common in gaming laptops, but as I said, I can't find any shorts. I've also tried 3 different power supplies, so it's not that either! I'm thinking ots either Chipstead, super IO, or bios, so I'm gonna do the easiest first and flash the bios, and cross my fingers, toes and bum cheeks! 😁 anyway, as you can see in the pics, there is 2 potential bios chips on this board, which I'm guessing both probably are, but I've no idea about these new bios setups, as stated above, so any help would really be appreciated guts, as I'm really stumped now!

Thanks in advance guys, as you've always been a massive help in the past! 😉👍🤟

[tesnic]

Hi Woody78 The winbond is the BIOS chip and the other is the EC BIOS chip. The first is about 16Mb bios, and the EC is only 256KB.I'm looking for these bios. I recommend you, first of all, made a backup of these bios with Ch341a Programmer for example. After that, you can try with the file in post #4.

[Woody78]

Hi Woody78 The winbond is the BIOS chip and the other is the EC BIOS chip. The first is about 16Mb bios, and the EC is only 256KB.I'm looking for these bios. I recommend you, first of all, made a backup of these bios with Ch341a Programmer for example. After that, you can try with the file in post #4.

Hi tesnic thank you buddy, and yes, my first step is always to make sure i save the original bios first, as thats not chanfed since i used to do it, lols, but thanks for the sound advice, as I may not have known that! 😉 So I'm guessing the main bios still dies as ur always did, but what is th4 EC bios for then, if you dint mind me asking?? 🤔 and if I flash the main bios, is it compulsory to flash the EC bios too?? So are they interconnected?? Thanks again buddy, u really appreciate your help! 😉👍

[tesnic]

They are diferent bios. One (the 16mb) is the main bios, and the another, is the "bios" of the EC / KBC.

[Woody78]

They are diferent bios. One (the 16mb) is the main bios, and the another, is the "bios" of the EC / KBC.

OK mate, thx again. In my case I dont think it was my bios anyway, the super IO chip has gone, so unless I can get a doner board, its toast. Even with a doner board, it might not just be the IO chip, something probably caused it to go! 😔