elitebook 850 G7 password

[Jari Oostvogels]

Can someone help me to remove a bios password?

HP Elitebook 850 G7
Board number: CAMELLIA-6050A3140901-MB-A01
SN: 5CG1129VTY

[SMDFlea]

Thread merged.

[hoaca388]

Can someone help me to remove a bios password?

HP Elitebook 850 G7
Board number: CAMELLIA-6050A3140901-MB-A01
SN: 5CG1129VTY

Post bios backup.

[Jari Oostvogels]

Sorry that I've forgotten to add the file.

[Jari Oostvogels]

I have 3 chips on the board

On back: MX25V8035F - This one has 1MB
On Back: 25Q128JV - This one Looks empty
On Front: 25q256JVEN - This one has 32MB

I have added the 1MB file

[volinakis]

I have 3 chips on the board

On back: MX25V8035F - This one has 1MB
On Back: 25Q128JV - This one Looks empty
On Front: 25q256JVEN - This one has 32MB

I have added the 1MB file

read 25Q128JV and use RCUnlocker on it

[Jari Oostvogels]

Thanks, but now the laptop is not starting up. Capslock and numlock are flashing. What can i try next?

[johnnypicnic]

Need some help getting passed Endpoint Security Controller problem. I think I lost the original bios or mislabelled it. Been trying to use some other saved bios with the 18EA048-190FFFF-25FB8.mps script to clean the ME but I get 5 caps lock.
SN: 5CG1205FT8

[Jari Oostvogels]

HP Elitebook 850 G7
Board number: CAMELLIA-6050A3140901-MB-A01
SN: 5CG1129VTY

Bios Password unlock. Already tried RCU, but not working.

On back: MX25V8035F - This one has 1MB
On Back: 25Q128JV - This one Looks empty
On Front: 25q256JVEN - This one has 32MB

[josebml]

Hello, I received an 850 G7 computer that looked like a prototype, it had no serial number or any information in the BIOS. I tried multiple BIOSes from the forum and with these BIOSes I attached, the computer boots, but it takes a very long time and runs very slowly, just at startup it takes almost 1 minute and 40 seconds. Can this be fixed? As I mentioned, there is no DMI data for the computer because the BIOSes were empty. Thank you very much.

[SMDFlea]

On Back: 25Q128JV - This one Looks empty

It isn`t empty, use RCUnlocker on that backup

BIOS guides, methods, resources and tools
https://www.badcaps.net/forum/troubl...rces-and-tools

[Jari Oostvogels]

SMDFleaI did it and it worked — the password is removed.
But after that I get the Endpoint Security Controller problem. I tried to fix that as well, but every time the BIOS doesn’t work.
I followed the other post, but I didn’t get the last step.

[SMDFlea]

SMDFleaI did it and it worked — the password is removed.
But after that I get the Endpoint Security Controller problem. I tried to fix that as well, but every time the BIOS doesn’t work.
I followed the other post, but I didn’t get the last step.

Do you mean you used the endpoint script ? ,if you did then cleaning the ME firmware would be the next thing to try

[Jari Oostvogels]

Do you mean you used the endpoint script ? ,if you did then cleaning the ME firmware would be the next thing to try

No, when I turn on the laptop, I get the message: HP Endpoint Security Controller problem.
After pressing Enter, the laptop just starts up without problems. I have zero experience cleaning the ME firmware. Is there a place that can help me with that?

[SMDFlea]

No, when I turn on the laptop, I get the message: HP Endpoint Security Controller problem.
After pressing Enter, the laptop just starts up without problems. I have zero experience cleaning the ME firmware. Is there a place that can help me with that?

Use the endpoint patcher script with the main bios https://www.badcaps.net/forum/troubl...security-error post #4 .Read the README.txt file for step by step instructions

Get the DMI from your main bios with Rex98`s tool - https://www.badcaps.net/forum/troubl...57-hp-dmi-tool