Hi PLEASE i need A WORKING bios dump lenovo ideapad 330S-15ikb model : 81F5
mainboard : 330s_kbl_mb_v07 rev:mp
THIS IS MY BACKUP NO IMAGE
mainboard : 330s_kbl_mb_v07 rev:mp
THIS IS MY BACKUP NO IMAGE
-
-
Re: Lenovo 330s_kbl_mb_v07 rev mp bios dump
Extracted From Lenovo -
Re: Lenovo 330s_kbl_mb_v07 rev mp bios dump
Thank you very much for your help a have tried this one but still the same i think the problem is in ram onboard but i dont know how to disable it and use just external ramComment
-
Re: Lenovo 330s_kbl_mb_v07 rev mp bios dump
Hello, then someone answered you on how to disable the internal ram?
Hi, the lenovo 330s notebook, if the ram soldered on the motherboard was good, should it start? Or do you still need secondary ram?
Thank youLast edited by piernov; 03-15-2023, 11:50 AM.Comment
-
Re: Lenovo 330s_kbl_mb_v07 rev mp bios dump
Yes it must start , if not than you have issue somwhereComment
-
Hi PLEASE i need A WORKING bios lenovo ideapad 330S-14ikb model : 81F4
mainboard : 330s_kbl_mb_v07 rev:mp
P/N: 431204230020
please!Last edited by COREQCOMPUTER; 12-19-2023, 09:50 PM.Comment
-
Comment
-
Hello everybody! Can I request for the EC bin file of this model? Unit's SIO is busted.
330s_kbl_mb_v07 rev: mp
ene9028q
TIA!Comment
-
read..https://www.badcaps.net/forum/troubl...before-posting
post the full name and model, S/N, etc.
-
-
Hello all,
I have a Lenovo Thinkstation P500 that is stuck at post with no display, it happened after I changed the memory timings in bios. I can not clear CMOS using the jumper on the motherboard, also tried re-flashing bios suing a USB stick but it also doesn't work. The only solution that I can think of right now is re-flashing the bios chip using an external programmer but the problem is that I don't have the bios dump of p500 for flashing externally and I don't know the location of bios chip. If someone can provide the bios dump and bios chip location it would be really helpful.... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi all! I was reading on tutorials how to flash a bios to remove password from a bios, and I ended up reading the EC chip instead of the main bios chip, it only gave me a .bin file of 1,024kb, I learned later that that is the EC chip not the main bios chip (I should have read the tutorials here instead before attempting anything, my bad), I went to flash the original backup, the 1,024kb size file into the same chip and laptop is not powering up anymore. I may have screwed the chip or even the motherboard (Hopefully not), I am trying to see if there is a fix before I discard it. I had a couple... -
Hi, I hope this is the right place to post this. This is my first post on this forum.
A friend helped me get a prototype Lenovo motherboard from China, it's got a hole drilled in it but I'm working on trying to revive it to some degree. I dumped the bios in hopes that it might be useful to someone, since this board is configured with the 3rd NVMe SSD slot and maybe it is useful as a reference for modding another bios to support this function. For example the M90q Gen 2 / P350's unpopulated 3rd NVMe slot footprint maybe.
This bios dump is straight from the chip, nothing has been... -
Lenovo X1 Carbon 7th Gen Type 20R1
SN: PF1Y5BBJ
Board: GX490 NM-C661 Rev: 1.0
I have made two dumps of this bios, with the bios chip removed from the board and the hashes match on both dumps, but I cannot find the DMI information in the dumps except for the Windows product key, so I think it is corrupted. I have downloaded two bios updates from the Lenovo support site, but they contain small .PAT file, and 4 subfolders containing .FL1 and .FL2 files, which I don't understand enough to figure out how to use to fix my dump.
The problem with the laptop is that...
Comment