hello
pleas need dump with original dmi added i attach my old corrupted dump thanksss
pleas need dump with original dmi added i attach my old corrupted dump thanksss
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Re: lenovo v130-20igm bios
sorry here is org dump thankssComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: lenovo v130-20igm bios
@peste what's tha number lines of dmi for this model thank youComment
-
Comment
-
Re: lenovo v130-20igm bios
You`ll have to use wflash2.exe to update the bios and add the DMI. Heres the instructions from the bios update readme
Bios update - https://download.lenovo.com/consumer...m1pjy27usa.exe
Bios README https://download.lenovo.com/consumer...m1pjy27usa.txt
3. Flash Program Options *
* *
* To deploy this application, please open the Windows Command Prompt *
* with Administrator privilege. Then run "xxxJYnnUSA.EXE -s -e" *
* to unpack the installation files into the default path: *
* "C:\SWTOOLS\FLASH\xxxJYnnUSA". After that, run "flash.cmd /quiet" *
* to start the update process. If you like to customize the update *
* options, please edit the wflash2.exe command line in the flash.cmd *
* file to make changes to the flash program options. *
* Note that "flash64.cmd" and wflash2x64.exe are provided to be used *
* in an environment without WOW64 support such as Windows *
* Preinstallation Environment (Windows PE) 64bit. *
* *
* Command options: *
* *
* wflash2.exe [option1] [option2] ... [optionX] *
* *
* [OPTIONS] *
* /h Show help messages. *
* /rsmb Preserve all SMBIOS structures. *
* /clr Clear BIOS settings. *
* /ign Ignore BIOS version check. *
* /sccm Support SCCM deployment *
* - see "Delaying Reboot in BIOS Update" below. *
* /sn:nnnnnnn Update system serial number (up to 20 characters). *
* /csn:nnnnnnn Update chassis serial number (up to 20 characters). *
* /mtm:nnnnnnn Update machine type and model number (up to 25 *
* characters). *
* /tag:nnnnnnn Update system asset tag (up to 25 characters). *
* /uuid The flash utility will generate an Universally *
* Unique Identifier (UUID), replacing the one that *
* is currently in the system.Comment
-
Re: lenovo v130-20igm bios
thank uuu work perfectlyy
Last edited by SMDFlea; 10-31-2021, 07:44 AM.Comment
-
Comment
-
Hello all,
I have a Lenovo Thinkstation P500 that is stuck at post with no display, it happened after I changed the memory timings in bios. I can not clear CMOS using the jumper on the motherboard, also tried re-flashing bios suing a USB stick but it also doesn't work. The only solution that I can think of right now is re-flashing the bios chip using an external programmer but the problem is that I don't have the bios dump of p500 for flashing externally and I don't know the location of bios chip. If someone can provide the bios dump and bios chip location it would be really helpful.... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi all! I was reading on tutorials how to flash a bios to remove password from a bios, and I ended up reading the EC chip instead of the main bios chip, it only gave me a .bin file of 1,024kb, I learned later that that is the EC chip not the main bios chip (I should have read the tutorials here instead before attempting anything, my bad), I went to flash the original backup, the 1,024kb size file into the same chip and laptop is not powering up anymore. I may have screwed the chip or even the motherboard (Hopefully not), I am trying to see if there is a fix before I discard it. I had a couple... -
Hi, I hope this is the right place to post this. This is my first post on this forum.
A friend helped me get a prototype Lenovo motherboard from China, it's got a hole drilled in it but I'm working on trying to revive it to some degree. I dumped the bios in hopes that it might be useful to someone, since this board is configured with the 3rd NVMe SSD slot and maybe it is useful as a reference for modding another bios to support this function. For example the M90q Gen 2 / P350's unpopulated 3rd NVMe slot footprint maybe.
This bios dump is straight from the chip, nothing has been... -
Lenovo X1 Carbon 7th Gen Type 20R1
SN: PF1Y5BBJ
Board: GX490 NM-C661 Rev: 1.0
I have made two dumps of this bios, with the bios chip removed from the board and the hashes match on both dumps, but I cannot find the DMI information in the dumps except for the Windows product key, so I think it is corrupted. I have downloaded two bios updates from the Lenovo support site, but they contain small .PAT file, and 4 subfolders containing .FL1 and .FL2 files, which I don't understand enough to figure out how to use to fix my dump.
The problem with the laptop is that...
Comment