Hi guys,
I am having problem with flashing (writing) BIOS Chip MX25L12873F on HP 830 G6.
With the flashrom software in Linux i got the error:
Erasing and writing flash chip... FAILED at 0x00011000! Expected=0xff, Found=0x00, failed byte count from 0x00011000-0x00011fff: 0x18
ERASE FAILED!
Looking for another erase function.
FAILED at 0x00018000! Expected=0xff, Found=0x00, failed byte count from 0x00018000-0x0001ffff: 0x12
Then i used Asprogrammer in Windows it showed me:
Possible protection is enabled. Press "Unprotect" and check datasheet
I have pressed "Unprotect" but no success
The Reading was good without any problem. Both in Linux and Windows. All the read files have same SHA256 Checksum.
I think there's something block writing on the Chip.
Maybe you can help.
Thank you
I am having problem with flashing (writing) BIOS Chip MX25L12873F on HP 830 G6.
With the flashrom software in Linux i got the error:
Erasing and writing flash chip... FAILED at 0x00011000! Expected=0xff, Found=0x00, failed byte count from 0x00011000-0x00011fff: 0x18
ERASE FAILED!
Looking for another erase function.
FAILED at 0x00018000! Expected=0xff, Found=0x00, failed byte count from 0x00018000-0x0001ffff: 0x12
Then i used Asprogrammer in Windows it showed me:
Possible protection is enabled. Press "Unprotect" and check datasheet
I have pressed "Unprotect" but no success
The Reading was good without any problem. Both in Linux and Windows. All the read files have same SHA256 Checksum.
I think there's something block writing on the Chip.
Maybe you can help.
Thank you
Comment