NEED BIOS FOR HP EliteBook 840 G5 6050a2945601-mb-a01

[sassan]

Did you check the bios with ME Analyzer before flashing it ? ,i`ll bet the ME firmware was Initialised. The ME firmware should have been cleaned first , there are some guides if you want to have a go at cleaning it yourself https://www.badcaps.net/forum/troubl...22#post1622422
If you`re going to use a bios from any intel machine check first if the ME is Initialised (Dirty) or Configured (Clean)

For the endpoint error try the endpoint patch script at post #2 https://www.badcaps.net/forum/troubl...security-error , it will clear the NVRAM

Thank you for your reply,You are right,the bin file is not clean,I tried this file from poste #2 which is clean,now the laptop works showing manufacturing mode ,the fan spins full speed, and late display.and no more security device Problem message.
Any i dea please

[SMDFlea]

Thank you for your reply,You are right,the bin file is not clean,I tried this file from poste #2 which is clean,now the laptop works showing manufacturing mode ,the fan spins full speed, and late display.and no more security device Problem message.
Any i dea please

Enter the DMI info with HP Bios Config utility BCU and update the bios

[SMDFlea]

someone help thankyou

try

[Jonjojonz]

try

thankyo,, its end up same problem, first time show post error without ssd, when ssd plug in show like windows loading then bios update to 1.3.1 , many particular bios update can 100% done screen off n on to prosses update, but suddenly off in prosses update about 14%, i prees power button same problem at begining finishing bios update, my mobo have chip explode before. track broken i repaired n replace chip, what kind is chip this

[Bault]

6050a2945601-mb-a01
HP endpoint security problem anybody repair these bios
ProdID 4DS10UC#ABA
SN#56G93502TF


this was burned on a regulator ic i cleared that after this is not turning on after we put it on sleep until i reconnect battery .

[SMDFlea]

thankyo,, its end up same problem, first time show post error without ssd, when ssd plug in show like windows loading then bios update to 1.3.1 , many particular bios update can 100% done screen off n on to prosses update, but suddenly off in prosses update about 14%, i prees power button same problem at begining finishing bios update, my mobo have chip explode before. track broken i repaired n replace chip, what kind is chip this

Can`t see the marking code the IC picture is too blurred. Check if a schematic is available

[SMDFlea]

6050a2945601-mb-a01
HP endpoint security problem anybody repair these bios
ProdID 4DS10UC#ABA
SN#56G93502TF

this was burned on a regulator ic i cleared that after this is not turning on after we put it on sleep until i reconnect battery .

Your main bios backup is only 65 bytes ,bad bad bad. Sometimes the endpoint error can be fixed using a patch script https://www.badcaps.net/forum/troubl...security-error

[Jonjojonz]

Can`t see the marking code the IC picture is too blurred. Check if a schematic is available

ic code sic534, base datasheet is for multi phase vrds for computing, graphic card n memory, is stiil work if this ic not present? during update bios is program stored in ssd?, btw thankyou bro

[Jonjojonz]

i reflash bios again n i think it work, problem is ssd contain bios update in windows corrupt, i can enter windows instalation via fd, n i turning off, stoped cause dont have new ssd, but i plugin charger n taking current 2 amp n leaving about 1 hour(batterai connected), when i came back fun spinning full speed i cant turn off by pressing power,then i hold power button to shutdown but damn my laptop now dead just led, keybord blingking power plugin no taking curernt anymore, pressing pwr didnt react. why any sugestion?

[aine256]

hi everyone help me i have 2 hp elitebook 840 g5, i lost both 2 bios chips when i flashed bios i get security device error, please help me

[SMDFlea]

hi everyone help me i have 2 hp elitebook 840 g5, i lost both 2 bios chips when i flashed bios i get security device error, please help me

Post moved to 840 G5 topic. Please read https://www.badcaps.net/forum/troubl...before-posting and post the laptop serial number. Maybe you will find a working bios + EC_Bios in this thread topic ,try some.

[fixed4ucy]

Hello every one. my laptop 840 g5 has no display caps lock blinks 5 times and after fast fan.
if any one can fix my bios. Thank you
serial:5cg8295cz3

[Bault]

6050a2945601-mb-a01
need to repair these bioses
problem is not turning on after sleep . i tried me clean but after it is turning off when we put to sleep and late display
ProdID 4DS10UC#ABA
SN#56G93502TF

[nikovmiroslav]

Hi Eveyone,I need big help,have this laptop,it turns on and just CapsLock blinking,noticed that the Main Bios is completely empty,I found other Dumps which are working but have 10sec late screen and on start ''HP Endpoint Security Controller Problem'',I will upload original and working dumps,if anyone can help,Thank you very much!

HP EliteBook 840 G5
ProdID 4WX66EC#ABD
SN# 5CG8376RB0
Motherboard: COMPUTRO-6050A2945601-MB-A01(A1)

[LBTT1121]

Hi Eveyone,I need big help,have this laptop,it turns on and just CapsLock blinking,noticed that the Main Bios is completely empty,I found other Dumps which are working but have 10sec late screen and on start ''HP Endpoint Security Controller Problem'',I will upload original and working dumps,if anyone can help,Thank you very much!

HP EliteBook 840 G5
ProdID 4WX66EC#ABD
SN# 5CG8376RB0
Motherboard: COMPUTRO-6050A2945601-MB-A01(A1)

try file fix endpoint

[NazaMusk]

Post moved to 840 G5 topic. Please read https://www.badcaps.net/forum/troubl...before-posting and post the laptop serial number. Maybe you will find a working bios + EC_Bios in this thread topic ,try some.

hi please help me remove this security
SN: 5CG905327Y

[nikovmiroslav]

try file fix endpoint

Thank you,but not working,Black screen with blinking CapsLock,I found the solution,Endpoint Security Controller Problem solved,dumps are Cleaned,just flash both files and enter Bios and write DMI informations,save,restart several times to lock MPM. Thank you Everyone!

[hamza hamza]

hi please help me remove this security
SN: 5CG905327Y

send me file EC

[soter]

Seri no 5CG8398HZ3
There was a security code, the leg broke off while disassembling the 256 one, I could not save the software inside, I bought MX25L25635FZ2I-10G instead of eprom and wrote the files by downloading them from the internet, but it does not trigger.
I would be happy if you could help. Thank you.

[peste]

Seri no 5CG8398HZ3
There was a security code, the leg broke off while disassembling the 256 one, I could not save the software inside, I bought MX25L25635FZ2I-10G instead of eprom and wrote the files by downloading them from the internet, but it does not trigger.
I would be happy if you could help. Thank you.

post S/N, full name and model ,motherboard model,.product number,,etc.