NEED BIOS FOR HP EliteBook 840 G5 6050a2945601-mb-a01

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Tehzeeb
    replied
    Hi all Senior Members
    Sir I have 840 g5 SR#5CG91539K1 ProdID:4JA18US#ABA
    I remove its bios ic then put it in another laptop after it I reinstall its orogionsl laptop then power on laptop but no display
    please help me to fine problem

    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • Muzakir Mohammed
    replied
    Originally posted by nikovmiroslav

    Thank you,but not working,Black screen with blinking CapsLock,I found the solution,Endpoint Security Controller Problem solved,dumps are Cleaned,just flash both files and enter Bios and write DMI informations,save,restart several times to lock MPM. Thank you Everyone!
    You are a life saver😊

    Leave a comment:


  • ammaraltahawy
    replied
    Plz I wanna to ask aquestion.
    if I don't have aclear dump my pc can't open win still loading and if I wanna to install afresh win it seems to be abad sector take alot of time to open .... ???

    Leave a comment:


  • ammaraltahawy
    replied
    Originally posted by peste

    post S/N, full name and model, motherboard model,etc.
    HP_EliteBook_840_G5_6050A2945601_MB_A01

    Leave a comment:


  • peste
    replied
    Originally posted by ammaraltahawy
    Plz remove bios password
    post S/N, full name and model, motherboard model,etc.

    Leave a comment:


  • ammaraltahawy
    replied
    Plz remove bios password
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • SMDFlea
    commented on 's reply
    https://www.badcaps.net/forum/troubl...31#post3768331

  • eriko45
    replied
    no display after bios update for my hp elitebook 840 g5.
    board number computro-6050A2945601-MB-A01
    SERIAL NUMBER 5CG8312VQZ
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • CraigR
    replied
    Thanks for the effort Stefan Steff but I get the same result. Must be something on the board and I don't know enough about laptop repair to fix it so off to scrap.

    Leave a comment:


  • Stefan Steff
    replied
    Originally posted by CraigR
    Thank you danito but it did not help me, sure thought that was the only issue. Now I just have a continus flashing yellow light. I still did just make a donation.
    This combo has saved many 840 G5s...
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • CraigR
    replied
    Thank you danito but it did not help me, sure thought that was the only issue. Now I just have a continus flashing yellow light. I still did just make a donation.

    Leave a comment:


  • danito
    replied
    Originally posted by CraigR
    I need both bios bins as they are both trashed from the last guy so I do not have anything to upload. Board 6050a2945601-mb-a01 Serial 5CG8525PBF Hp EliteBook 840 G5
    try
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • CraigR
    replied
    I need both bios bins as they are both trashed from the last guy so I do not have anything to upload. Board 6050a2945601-mb-a01 Serial 5CG8525PBF Hp EliteBook 840 G5

    Leave a comment:


  • florenz
    replied
    Originally posted by SMDFlea

    This topic is for the 840 G5. Post your request in the 640 G5 topic https://www.badcaps.net/forum/troubl...probook-640-g5 .Check the serial number again, it`s wrong.
    SORRY it's indeed an 840.the back cover its so dirty so i read it bad;

    Leave a comment:


  • SMDFlea
    replied
    Originally posted by florenz
    HELLO BAD CAP
    please i have an hp 640 G5
    SN 2TK9250Q
    PROD 5NE87U8 #ABA
    I TRY TO FLASH . BUT IT STARTS AND STUCK ON HP . PLEASE I NEED HELP
    This topic is for the 840 G5. Post your request in the 640 G5 topic https://www.badcaps.net/forum/troubl...probook-640-g5 .Check the serial number again, it`s wrong.

    Leave a comment:


  • florenz
    replied
    HELLO BAD CAP
    please i have an hp 640 G5
    SN 2TK9250Q
    PROD 5NE87U8 #ABA
    I TRY TO FLASH . BUT IT STARTS AND STUCK ON HP . PLEASE I NEED HELP

    Leave a comment:


  • LBTT1121
    replied
    Originally posted by Aziz aj
    HP EliteBook 840 G5 COMPUTRA-6050A2945601-MB-A01(A1) COMPUTRO_RevA01
    fan flashing no display
    post Serial number

    Leave a comment:


  • Aziz aj
    replied
    HP EliteBook 840 G5 COMPUTRA-6050A2945601-MB-A01(A1) COMPUTRO_RevA01
    fan flashing no display
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • soter
    replied
    Originally posted by peste
    post S/N, full name and model ,motherboard model,.product number,,etc.
    Seri no 5CG8398HZ3
    MAİNBOARD MODEL: COMPUTRO-6050A2945601-MB-A01(A1)
    PRODUCT NUMBER: HSN-I13C-4
    PROD ID: 2FA66AV
    HP ELİTEBOOK 840 G5
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • peste
    replied
    Originally posted by soter
    Seri no 5CG8398HZ3
    There was a security code, the leg broke off while disassembling the 256 one, I could not save the software inside, I bought MX25L25635FZ2I-10G instead of eprom and wrote the files by downloading them from the internet, but it does not trigger.
    I would be happy if you could help. Thank you.
    post S/N, full name and model ,motherboard model,.product number,,etc.

    Leave a comment:

Related Topics

Collapse

  • Wutru
    HP Elitebook 820 G4 BIOS repair assistance required
    by Wutru
    Hi guys,

    If someone would be able to provide some expertise, I'd be very grateful.

    BIOS Corruption - Cause
    So I managed to corrupt my machine by installing linux and enrolling custom secure boot keys. I did choose to enroll the Microsoft keys as well, to prevent any potential bricking due to 3rd party drivers from HP being signed with those keys.
    After doing that, and rebooting(it did boot, powerLED, fanspin etc.), the laptop did not give any video output on the LCD or video connectors. I think I was able to get in BIOS and trigger the beeper by pressing ESC....
    09-06-2025, 10:32 AM
  • STKR123
    The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
    by STKR123
    Greetings badcaps community,

    I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
    So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

    Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

    I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

    These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

    I learned that desoldering...
    10-29-2024, 06:03 AM
  • macabook
    šŸ› ļø MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
    by macabook
    Hello everyone,

    I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
    🧩 Initial Issue
    • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
    • External display (HDMI) shows
    ...
    07-24-2025, 02:17 PM
  • Guest
    Elitebook 850 G5 BIOS bricked
    by Guest
    Hello,

    I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.

    I assume the BIOS update failed, so I searched for the BIOS chip.

    I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.

    However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.

    Can the corrupted...
    03-24-2025, 01:21 AM
  • cr4zychriss
    [Problem/ Request] Bricked TongFang GK7MRFR BIOS
    by cr4zychriss
    Hello everyone,
    I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
    I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details
    • Barebone / Chassis: TongFang GK7MRFR
    • MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
    • Rebrand: PC Specialist
    ...
    11-14-2025, 04:04 PM
  • Loading...
  • No more items.
Working...