Asus X54UVK Rev 2.0 Bios dump

[speggio91]

Hello,

by suggestion of a member of this forum, I dumped the bios of this machine and attach it there. I request for a check of the image if its corrupted,

thank you very much.

[lapfix]

Re: Asus X54UVK Rev 2.0 Bios dump

Try ..

[speggio91]

Re: Asus X54UVK Rev 2.0 Bios dump

Try ..

Thanks. I can't get it to flash to any software, i am using the ch341A mini programmer with Neoprogrammer and when it has to verify the image it give a verification error.
I think is the software that doesn't have in its database the bios chip i have (gigadevice 25B64CSIG).
Is there any software that has that chip in the database?
Or I can add it manually on neoprogrammer but I don't have the parameters.

[peste]

Re: Asus X54UVK Rev 2.0 Bios dump

Thanks. I can't get it to flash to any software, i am using the ch341A mini programmer with Neoprogrammer and when it has to verify the image it give a verification error.
I think is the software that doesn't have in its database the bios chip i have (gigadevice 25B64CSIG).
Is there any software that has that chip in the database?
Or I can add it manually on neoprogrammer but I don't have the parameters.

try this..

https://www.badcaps.net/forum/showpo...6&postcount=10

[speggio91]

Re: Asus X54UVK Rev 2.0 Bios dump

try this..

https://www.badcaps.net/forum/showpo...6&postcount=10

That software seemed to have worked because it completed the flash process even if it couldn't verify the chip.
But after soldering the chip back to the board there is no power, if i press the power button nothing happens.
Before flashing the bios, the board turned on by itself just with the red led of the charger even if no battery was connected and when I pressed the power button the board powered on for a second then shut down.

I believe the bios did not flashed correctly. I will try again or I'll buy a better programmer.

Link to the repair board topic:
https://www.badcaps.net/forum/showth...ghlight=x54uvk