HP 840 G6 BIOS - switch ON the MPM mode

[Kazik]

Hi,

Can you turn on the MPM (Manufacture Programming Mode) in this BIOS, please? Yes I need this BIOS in MPM mode.

Eventually is there any tool to find MPM settings in BIOS (tool that can work with BIN files)?

I know where that HEX is in 8MB BIOS but have no idea where to look for it in 32MB BIOS.

Thank you.

[alfanikos]

HP 840 G6 MPM (Manufacturing Programming Mode) turn on

Can Someone indicate tthe procedure to Turn ON the Manufacturing Programing Mode) so as to am,end the DMI

I have tried with the BCU urility by changing the star "**" from "Lock" position to "Unlock" position without any positive result.

I understand that changes in the BIOS (by using the BCU) are only possible if the MPM is in Unlock condition

If someone has different knowledge please post the experience gained.

[vilmar27@hotmail.com]

Hello,
Please, could someone help me to Unlock the MPM to edit the DMI information of BIOS?

HP Probook 640 G4
Serial: BRJ9294026
Part: 5WN41LP#AC4
CT System: PHLRB0AGACC7RQ
BuildId: 17WWC6CT601#SAC4#DAC4
3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAcydUdpdqhk.AM

Also someone know what HEX information in the BIN file I can edit to change the below information from Lock to Unlock?

Manufacturing Programming Mode
Unlock
*Lock

Tks,
Vilmar

[rex98]

Hello,
Please, could someone help me to Unlock the MPM to edit the DMI information of BIOS?

HP Probook 640 G4
Serial: BRJ9294026
Part: 5WN41LP#AC4
CT System: PHLRB0AGACC7RQ
BuildId: 17WWC6CT601#SAC4#DAC4
3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAcydUdpdqhk.AM

Also someone know what HEX information in the BIN file I can edit to change the below information from Lock to Unlock?

Manufacturing Programming Mode
Unlock
*Lock

Tks,
Vilmar

here's your DMI info. Use BCU
Serial Number: BRJ9294026
Product Number: 5WN41LP#AC4
CT Number: PHLRB0AGACC7RQ
Description: HP ProBook 640 G4
build_id: 17WWC6CT601#SAC4#DAC4
Feature Byte: 3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAcydUdpdqhk.AM
MAC Address: E4-E7-49-12-7B-C6

[vilmar27@hotmail.com]

Thanks a million rex98!

[hypermk735]

here's your DMI info. Use BCU
Serial Number: BRJ9294026
Product Number: 5WN41LP#AC4
CT Number: PHLRB0AGACC7RQ
Description: HP ProBook 640 G4
build_id: 17WWC6CT601#SAC4#DAC4
Feature Byte: 3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAcydUdpdqhk.AM
MAC Address: E4-E7-49-12-7B-C6

How did you edit the BIN file to enable MPM? I am trying to do it myself.