Lenovo bios V330-15IKB

[hoaca388]

Re: Lenovo bios V330-15IKB

So do you mean, that firmware, which linked hoaca388, should work, right?

That's right. Your computer has a hardware error.

[YellowJacket]

Re: Lenovo bios V330-15IKB

Thank you

[gigasi]

Hello, I have a lenovo v330-15ikb, I have tried several bios but it takes a while to turn on and then turns off after being on. I leave the old bios in case anyone has a solution. thank you so much.

[hoaca388]

hello, i have a lenovo v330-15ikb, i have tried several bios but it takes a while to turn on and then turns off after being on. I leave the old bios in case anyone has a solution. Thank you so much.

vvvvvv

[gigasi]

Works Fine!

[yvzasl]

https://www.badcaps.net/forum/showth...ios+V330-15IKB

thank you, it works smoothly

[fredo]

Lenovo v330-15ikb
s n: R90syee2
17807-3m
model 81ax
There is no image, please help

[Vesko356]

Lenovo v330-15ikb
s n: R90syee2
17807-3m
model 81ax
There is no image, please help

Use the bios attached at post 69, transfer DMI data from your bios - offsets are shown in post 51.

[hoaca388]

Lenovo v330-15ikb
s n: R90syee2
17807-3m
model 81ax
There is no image, please help

CCCCC

[HaDRFakrrr]

Hello, help me with Lenovo V330-15IKB 81AX bios dump please🙏after update bad display, fan spin, and caps lock on. In attached files is original BIOS backup.
Thank you very much for any help.

Full machine model number	LENOVO V330-15IKB 81AX
MTM	81AX00SWCK
Serial number	R90T6HPJ
UUID Number	ED735400-89F3-43A2-A7C2-FC9192965677
BIOS Version	6SCN54WW
EC Version	6SEC21WW
MO	R9N0B922000F

[peste]

try post#29..

[HaDRFakrrr]

thank you peste. I try BIOS from post#29 and problems are unfortunately same

[Martin Vavera]

Hello, i have Lenovo V330-15IKB
Product name

Lenovo V330-15IKB
BIOS Version 6SCN54WW
EC version 6SEC21WW
MTM 81AX00SWCK
sn: R90SH1C1

My laptop only sees the original 128GB SSD in the M.2 slot, it doesn't see any other SSD. Now I bought an SSD directly from Lonovo parts, with the fact that it was fitted to this model, but the ntb doesn't see it either. So I can't upgrade. Probably a bug in the FW
I tried factory reset bios. The disk is ok, other PCs can see it immediately. Any advice please?

[peste]

Hello, i have Lenovo V330-15IKB
Product name

Lenovo V330-15IKB
BIOS Version 6SCN54WW
EC version 6SEC21WW
MTM 81AX00SWCK
sn: R90SH1C1

My laptop only sees the original 128GB SSD in the M.2 slot, it doesn't see any other SSD. Now I bought an SSD directly from Lonovo parts, with the fact that it was fitted to this model, but the ntb doesn't see it either. So I can't upgrade. Probably a bug in the FW
I tried factory reset bios. The disk is ok, other PCs can see it immediately. Any advice please?

Try post #29, don't forget to make a copy of the original bios before writing...next time post the bios here too, even if it's corrupted...

[Martin Vavera]

thank you i will try please, how to update and previous bios backup? Somehow I didn't read how to do it. Thank you for the advice.

[Martin Vavera]

I have downloaded the bin file and it is on a USB flash drive, I found it in post 17, I assume that I have a USB at startup and press Fn+R - this is for upgrading, but I didn't find how to backup the bios first. I want to try it, I want a bigger disk. I have a disc that doesn't work for me, so I'd like to give it a try before I return it to the dealer. :-) Thanks

[peste]

I have downloaded the bin file and it is on a USB flash drive, I found it in post 17, I assume that I have a USB at startup and press Fn+R - this is for upgrading, but I didn't find how to backup the bios first. I want to try it, I want a bigger disk. I have a disc that doesn't work for me, so I'd like to give it a try before I return it to the dealer. :-) Thanks

You need an SPI programmer.. watch a video here for information..
https://www.youtube.com/watch?v=DWWigscuQDY

[Martin Vavera]

I watched the video, so I don't know, I probably won't give it. The chip must be desoldered, or it can be left on the board and connected with the terminals supplied with the programmer
Thank you

[peste]

I watched the video, so I don't know, I probably won't give it. The chip must be desoldered, or it can be left on the board and connected with the terminals supplied with the programmer
Thank you

the chip must be desolder from the motherboard, and solder to the programmer, or soldered wires, between the chip and the programmer.. do not use the clip, you will have errors..

[Martin Vavera]

thank you very much for the advice. Unfortunately, I don't disconnect the chip and I haven't found anyone who can. So unfortunately I have to leave the laptop as it is :-(, I was hoping for some Fn+r boot method, but this is beyond my abilities. Thanks again.

[bouny56]

Hello can you help me with a clean Me for a lenovo v330-15ikb please?

Slow boot

Lenovo v330-15IKB
Model : 81AX
Sn : R90PLFK5


thx