Danny159
Member
Last Activity: Yesterday, 02:11 AM
Joined: 12-31-2021
Location: Satu Mare
-
Bios Cracker[USER="582869"]Bios Cracker[/USER] and LBTT1121 Thank you very much for your work, I tried both bios but unfortunately the same problem, the fan starts at maximum speed then turns off this laptop with the charger from the power... -
Hi all, i have i have a Dell Latitude 5590 start 5 sec. and the fan run quickly and stop
all voltage in standby is good i think the bios is corupted
please clean ME
Mb. DDM80 LA-F411P REV. 2.0 (A01)
2018-05-03
I don't know if the back cover is the original one on this
Service Tag is CGWMNQ2
Thank in advance [ATTACH]n3606366[/ATTACH]...Leave a comment:
-
Bios Cracker[USER="582869"]Bios Cracker[/USER] thank you very much it work great
[USER="102232"]uvaiz[/USER] thank you also very much for service tag it workuvaiz[USER="582869"]Bios Cracker[/USER] thank you very much it work great
Leave a comment:
-
Hello everyone,
I bought a DELL Latitude E7470 AAZ60 LA-C461P Rev. 1.0 laptop motherboard, it had a short on the main power, I solved the short but now it starts, all the voltages are ok but it doesn't give a picture and it turns off, I don't have the case so I don't know the Service Tag, please help me with checking the bios and possibly a clean ME Region. Thanks in advance....Leave a comment:
-
maksimthuk[USER="49488"]maksimthuk[/USER] Thank you very much!!!Leave a comment:
-
Thank you very much!!!...Leave a comment:
-
Thank you very much!!!...Leave a comment:
-
Thanks very much!!!Leave a comment:
-
Thank you very much ,,Bonzas"Leave a comment:
-
Thank you very much, but the problem is that it doesn't start even with the original bios, could it be the 50 ohm resistor that I lost? I think its value is 49.9 ohm according to the schematic.Leave a comment:
-
Hello everyone,
I have a problem with a Dell Latitude 5500 laptop I bought last week from a local website, the seller told me it was password protected but the price was good so I bought it. I turned it on and of course it has a master password so I searched the net for solutions and identified the bios chip which is Winbond 25Q256JVEIQ and I desolder with the hot air station all good and well I read it with the programmer I have an EZP2023+ SPI Flash which for me is ok for now just that I only read it once I saved it twice in two different locations although I knew I had to read it 2- 3...Leave a comment:
-
Many thanks to Knucklegrumble and Maxpower3 for their efforts and of course to everyone who helps and teaches us.
Thank you very much!Leave a comment:
-
Thank you very much, great job!!!Leave a comment:
-
Thank you very much!!!Leave a comment:
-
Thank you so much, great job!!!Leave a comment:
-
Thank you very much men!Leave a comment:
-
Thank You very much!!!...Leave a comment:
-
Thank you very much men...Leave a comment:
-
Thank you very much man!Leave a comment:
-
thank you it works perfect, great man!!!...Leave a comment:
No activity results to display
Leave a comment: