clevo p650sg u37 and u38 bios dump request

[ahnic]

Hi Do you have u37 and u38 bios dump of clevo p650sg so that I can use CH341a to program the chips? The motherboard model is 6-71-p6500-d03.Thanks in advance!

[peste]

Re: clevo p650sg u37 and u38 bios dump request

https://www.badcaps.net/forum/showth...t=clevo+p650sg

[ahnic]

Re: clevo p650sg u37 and u38 bios dump request

It seems that they are for P650SE. But I will try them. Thanks

[SMDFlea]

Re: clevo p650sg u37 and u38 bios dump request

Hi Do you have u37 and u38 bios dump of clevo p650sg so that I can use CH341a to program the chips? The motherboard model is 6-71-p6500-d03.Thanks in advance!

Bios + EC, BACKUP and VERIFY both your bios first before flashing the new ones . Flash the EC from windows,read the Read me file in EC folder .



Bios http://repo.palkeo.com/clevo-mirror/P65xSG/

Service Manual http://repo.palkeo.com/clevo-mirror/...P65XSG_ESM.zip

[ahnic]

Re: clevo p650sg u37 and u38 bios dump request

Bios + EC, BACKUP and VERIFY both your bios first before flashing the new ones . Flash the EC from windows,read the Read me file in EC folder .



Bios http://repo.palkeo.com/clevo-mirror/P65xSG/

Service Manual http://repo.palkeo.com/clevo-mirror/...P65XSG_ESM.zip

Thanks SMDFlea.The machine is currently not posting and I took out the motherboard and de solder U37 and U38. I read the content of them using CH341a programmer. Should I flash the attached zip file to U37 and U38 using CH341a programmer directly? How to VERIFY the bios first? Thanks again

[SMDFlea]

Re: clevo p650sg u37 and u38 bios dump request

Thanks SMDFlea.The machine is currently not posting and I took out the motherboard and de solder U37 and U38. I read the content of them using CH341a programmer. Should I flash the attached zip file to U37 and U38 using CH341a programmer directly? How to VERIFY the bios first? Thanks again

Theres a good CH341A programming guide over at win-raid,read part 2. https://winraid.level1techs.com/t/gu...rammer/32948/3
https://mh-nexus.de/en/hxd/

[ahnic]

Re: clevo p650sg u37 and u38 bios dump request

Theres a good CH341A programming guide over at win-raid,read part 2. https://winraid.level1techs.com/t/gu...rammer/32948/3
https://mh-nexus.de/en/hxd/

Hi, Your attached zip files for u37 and u38 are official bios files and cannot be directly used to CH341a program the chips after unzip. How can I convert your official unzip bios files to bin files so that I can directly CH341a program the chips? Thanks

[SMDFlea]

Re: clevo p650sg u37 and u38 bios dump request

Hi, Your attached zip files for u37 and u38 are official bios files and cannot be directly used to CH341a program the chips after unzip. How can I convert your official unzip bios files to bin files so that I can directly CH341a program the chips? Thanks

See the Attached Files in my post. Download the 2MB and 4Mb zip files,extract each using winrar or 7-zip to get the bin files. If you`re having problems with the CH341A then try ASProgrammer,its a good software alternative https://www.badcaps.net/forum/showpo...6&postcount=10 .Choose the bios chip manually.

[dridzz]

Re: clevo p650sg u37 and u38 bios dump request

How to locate the two bios chips? And which one is which ?

[d4wec]

Re: clevo p650sg u37 and u38 bios dump request

How to locate the two bios chips? And which one is which ?

See upon the link for the service manual, so as i know, the u37 has the bios rom 4mb and u38 has the ME rom 2mb. There are located in the side where are the ram slot.