Hello guys i need help to find bios dump for HP 450 I3 laptop
thanks..
thanks..
-
-
Re: hp 450 bios dump
backup old and try this -
Re: hp 450 bios dump
Hello thank you very much, today after a long time I installed the BIOS, but does not work., This BIOS you tested and works well ??Comment
-
-
Re: hp 450 bios dump
i need the discrete version.thanks in advanceComment
-
Re: hp 450 bios dump
please help bios dump (.bin) Hp probook 450 g3 i5.... (DA0X63MB6H1 REV:H)...Comment
-
Re: hp 450 bios dump
Same need 450 g3
bios lockedComment
-
Re: hp 450 bios dump
am still looking for hp 450 g3 i5Comment
-
Hp pro book 450 g3 bios help
Hi there i need help with this dump, and shema wil be ok
mobo nomber is:
DA0X63MB6H1 REV:H
INTEL CPU I3
AMD GPUComment
-
Re: Hp pro book 450 g3
Try this. I have rebuilt bios region.Comment
-
Re: Hp pro book 450 g3
Happy your case is solved.Comment
-
Need Bios HP Probook 450-G3
Hello My Friends
i need this model note book bios :
Thanks , RegardsCode:Model: HP Probook 450 G3 Platforma: Quanta X63 DA0X63MB6H1 REV. H CPU: Intel Core i7-6500U SR2EZ GPU: AMD 216-0864032
Comment
-
Re: Need Bios HP Probook 450-G3
You have old bios post here and old bios problem what?Comment
-
Re: hp 450 bios dump
anyone with a good bios .bin for DA0X63MB6H1 REV:H
core i5Comment
-
Re: hp 450 bios dump
Hello everyone,
here I attach working HP 450 G3 BIOS. Don't know exact motherboard code, but I'm sure it's UMA, Intel HD Graphics CPU with i5-6200U CPU.
Best regards,
RaimondasComment
-
Re: hp 450 bios dump
try...Originally posted by umer computersIf you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Hi, I'm new to all of this so I hope I'm doing correctly and not breaking any rules.
I need help for my MSI PRO B660M-A DDR4 motherboard BIOS dump.
The motherboard got bricked during BIOS update due to a power cut in my village while updating BIOS. Now the PC is not booting. Fans kept spinning and no display is coming.
A local technician said I need the full BIOS dump/file for this motherboard.
My Motherboard model is:
MSI PRO B660M-A DDR4
MS-7D43 REV 1.0
The Bios chip is:
MXIC
MX25U25673GZ4140
Please, if anyone has the same board... -
Hi everyone,
I'm looking for a BIOS dump or older BIOS that still supports the AMD A6-9500E (Bristol Ridge) on a Biostar A320MH 2.0 Ver. 6.1 motherboard.
Here's what happened:- Motherboard: Biostar A320MH 2.0 Ver. 6.1
- Original CPU: AMD A6-9500E
- Original BIOS version: Reported as 5.15
- The A6-9500E worked normally before the BIOS update.
I updated the BIOS using the built-in BIOS Flasher to A32GS311.BSS. After the update:- ❌ AMD A6-9500E powers on but shows a black screen (no display).
- ✅ Ryzen 3 2200G boots and works normally.
I've already tried:- Clearing
07-12-2026, 10:36 PM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, Thanks for all you do here.
I have attached my 16MB dump.
EDIT2: All hardware working fine, I think I just need to update my linux booatloader and all gucci
EDIT:
I can get into bios now! I reflashed as instructed elsewhere. With a minimal POST (just 1 stick of ram , GPU, CPU, no drives) I have loaded into BIOS. I am about to reinstall my other hardware components now.
The clips are such a pain to use, soldering would be a great skill to have.
Thanks for the advice in other threads!
To answer my own question, I didn't...03-24-2026, 05:55 AM
Comment