XMC qh128ahig chip

[Synne]

Does anybody know can I use CH341A programmer for flash XMC qh128ahig chip and if not which model of programmer I need to have? (I was read something about this chip is not so common and found info. that many SPI-programmers are not compatible and cant write just read from this chip).

[mcplslg123]

Re: XMC qh128ahig chip

RT809 series programmer works with XMC chips and it is listed there. Dont know about CH34A

[Synne]

Re: XMC qh128ahig chip

thank you very much on useful info

[voodoop]

Re: XMC qh128ahig chip

I have the same chip and I can't read it with RT809F .
It is not listed either .

[SMDFlea]

Re: XMC qh128ahig chip

I have the same chip and I can't read it with RT809F .
It is not listed either .

It is listed.Update your software version .

https://www.hklrf.com/24download/img/RT809F-List2.txt

https://www.hklrf.com/RT809F-Programmer_3546.html

[voodoop]

Re: XMC qh128ahig chip

001: ÐòÁкţº20180308212215-006326£¬±à³ÌÆ÷¹Ì¼þ°æ±¾£ºV3.0 ¡£
002: Auto identified 9 ID is match with the partnumber.
003: http://www.ifix.net.cn/thread-2550-1-1.html
004: The currently selected:XM25QH128A@SOIC8-200, capacity: 128Mbits, 16Mbytes.
005: >------------------------------------OK---------------------------------------<
006: Chip pins contact is detected OK.
007: Chip ID verification OK.
008: Start reading chip......
009: Status register1 values: 0x0 ¡£
010: Read successful£¬Elapsed time£º26.34 seconds¡£
011: Auto verifying...
012: Chip verification error, start position: 0x600000.
013: Verification failure£¬Elapsed time£º4.015 seconds¡£
014: Read error, operation aborted.

I get this error with the latest version .
I tried with all identified chips .

[Murtaza527]

Re: XMC qh128ahig chip

for me also same error any solution guys

[mcplslg123]

Re: XMC qh128ahig chip

If it reads successfully but gives verification error-then the chip itself is bad. You need to replace it.

[Murtaza527]

Re: XMC qh128ahig chip

its 10th gen laptop and that bios is working fine i wanna read and copy for othe laptop but i cant read from this chip. i have tried from ch341 and rt809f
and i'm using the latest updated versions

[jimander2012]

Re: XMC qh128ahig chip

good night like i also have ch341 and it does not detect it

[luiscwb]

Re: XMC qh128ahig chip

RT809F list but does not read or write, there is an error. Which programmer supports this eprom?

[torrevieja]

Re: XMC qh128ahig chip

RT809F list but does not read or write, there is an error. Which programmer supports this eprom?

https://www.youtube.com/watch?v=nA--ggJUaj0

[Vicarinat]

Re: XMC qh128ahig chip

For TL866CS
NOTE: The Check ID option must be unchecked

XMC QH64AHIG (XM25QH64AHIG): Compatible with
W25Q64FVSIG GD25Q64CSIG MX25L6406E EN25QH64A W25Q64JVSSIQ

XMC QH128AHIG (XM25QH128AHIG): Compatible with
W25Q128FVSIG GD25Q128CSIG MX25L12845E EN25QH128A W25Q128JVSQ

These work at 3.3v so no adapter will be necessary

I hope it serves you
Greetings to all

[jonny0404]

Re: XMC qh128ahig chip

Vicarinat i have minipro tl866a does it work on that minipro by uncheck id...

[svapoesmart]

Re: XMC qh128ahig chip

vicarinat great tips is working fine

[Carlazos]

Re: XMC qh128ahig chip

For TL866CS
NOTE: The Check ID option must be unchecked

XMC QH64AHIG (XM25QH64AHIG): Compatible with
W25Q64FVSIG GD25Q64CSIG MX25L6406E EN25QH64A W25Q64JVSSIQ

XMC QH128AHIG (XM25QH128AHIG): Compatible with
W25Q128FVSIG GD25Q128CSIG MX25L12845E EN25QH128A W25Q128JVSQ

These work at 3.3v so no adapter will be necessary

I hope it serves you
Greetings to all

Thanks

[roixijram]

Re: XMC qh128ahig chip

For TL866CS
NOTE: The Check ID option must be unchecked

XMC QH64AHIG (XM25QH64AHIG): Compatible with
W25Q64FVSIG GD25Q64CSIG MX25L6406E EN25QH64A W25Q64JVSSIQ

XMC QH128AHIG (XM25QH128AHIG): Compatible with
W25Q128FVSIG GD25Q128CSIG MX25L12845E EN25QH128A W25Q128JVSQ

These work at 3.3v so no adapter will be necessary

I hope it serves you
Greetings to all

[Channas]

Re: XMC qh128ahig chip

Good day, I just checked NEO Programmer and the MXqh128a is on there, will try it out today if you need feedback.

[telfix]

Re: XMC qh128ahig chip

Hi. I have XMC QH128AHIG and TL866CS programmer. I tried to read the data but no result. I set the programmer to the W25Q128FV model and for two minutes it displays the message: Reading Code memory. Result, all addresses have the content 00. Check ID turned off. What else can I do?

[estorninosn]

Re: XMC qh128ahig chip

Does anybody know can I use CH341A programmer for flash XMC qh128ahig chip and if not which model of programmer I need to have? (I was read something about this chip is not so common and found info. that many SPI-programmers are not compatible and cant write just read from this chip).

Did you find any solution to your problem? I have the same chip and I need to read write to it.. Hope you have the solution by now...