Hi, I need bios dump for this laptop ilife zed air. or someone knows the location where to reset the bios in the mainboard...
iLife Zed Air BIOS dump
Collapse
X
-
-
Re: iLife Zed Air BIOS dump
display is ok. i changed bios settings and now keyboard, touchpad and even usb port are disabled.
can't find direct reset on mainboard. can't get into bios now because keyboard is disabled.
do you have a backup of this bios?Comment
-
-
Re: iLife Zed Air BIOS dump
Hey guys any solution to this Problem. I accidentally disable the Video GOP driver in the Setup utility and advance setting and now I don't see anything as the screen is completely black. I either need the steps (keyboard strokes) to do it re-enable the driver blindly, or do a cmos rest on the mobo. My laptop is i-life
Zed Air.
Would appreciate any help.Comment
-
Re: iLife Zed Air BIOS reset
I also have same problem Hey guys any solution to this Problem. I accidentally disable the Video GOP driver in the Setup utility and advance setting and now I don't see anything as the screen is completely black zed also dont have comsComment
-
Comment
-
Comment
-
Re: iLife Zed Air BIOS dump
this is backup of working bios but keyboard +usb is not wok if u have asolutionAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: iLife Zed Air BIOS dump
hi can you help me how to get back my lcd backlight of my zed air 14? it has display but no backlight it started when i accidentally short the red and black terminal of the battery then display went blankscreen but it has display if you point flashlight to the lcd i notice also the one ic labeled LP6253H became too hot so i remove it ,it has 2 pcs LP6253H my laptop still powering on and has display just the backlight went goneis it possible that the LP6253H is the cause?i cant find LP6253H to scrap boardcould anyone give me compatible ic to LP6253H? thanksAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Comment
-
Re: iLife Zed Air BIOS dump
HERE IS THE SOLUTION for kbd ,mouse not working in zed air sa series.
Please follow the instructions If keyboard or mouse not working in ZED series.
First you need to open the on-screen-keyboard from the ease of use menu.
Instruction:
1.Open run option from window bar and type regedit.
2.Go to HKEY_LOCAL_MACHINE
3.SYSTEM
4.CurrentControlSet
5.Services
6.i8042prt,
7.Start
8.Right click
9.Modify
10.Value data
Type 1
Ok
Exit
Restart PCComment
-
Re: iLife Zed Air BIOS dump
How to open ease of menu without keyboard and mouse ?HERE IS THE SOLUTION for kbd ,mouse not working in zed air sa series.
Please follow the instructions If keyboard or mouse not working in ZED series.
First you need to open the on-screen-keyboard from the ease of use menu.
Instruction:
1.Open run option from window bar and type regedit.
2.Go to HKEY_LOCAL_MACHINE
3.SYSTEM
4.CurrentControlSet
5.Services
6.i8042prt,
7.Start
8.Right click
9.Modify
10.Value data
Type 1
Ok
Exit
Restart PCComment
Related Topics
Collapse
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by mkdjDear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...-
Channel: BIOS Requests ONLY!
-
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”...2 Photos-
Channel: BIOS Requests ONLY!
-
-
by EGUGI have a Fujitsu PC with defective bios after bios update from Windows. Therfore I need a bios dump to fix it.
Fujitsu Esprimo D7010n
Serial number EICK023345
Mainboard D3823-A2
Hope somebody can help me.-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Comment