-
Last edited by SMDFlea; 04-12-2023, 01:58 PM.Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Re: Need bios dump for HP elitebook 840 g1
unfortunately not turning on, Caps Lock blinkingLast edited by 3lsheikh; 11-28-2020, 08:42 AM.Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Need bios dump for HP elitebook 840 g1
Sorry i don't know which one is the motherboard version attached photos of the stickersAttached FilesComment
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Need bios dump for HP elitebook 840 g1
I think it's : 730804-001Comment
-
Re: Need bios dump for HP elitebook 840 g1
This one 6050A2560201-MB-A03Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Comment
-
Re: Hp 840 g1 - 6050a2560201-mb-a02
your bios chip is not good...i guess it's a winbond, take another chip and program itComment
-
Re: Hp 840 g1 - 6050a2560201-mb-a02
thankzComment
-
840 g1
Hi,
I have two HP 840g1 with which I cannot get the bios with my CH341.
I tested, replaced everything (programmer, clip, cable, usb port...) and the result remains the same :
when i put the clip on the chip it the software it detected the good chip then no more connection on it
Detection fails could not find the chip with CH341A Programmer soft 1.30 or
1 fast small blink then completely yellow led on ch341 with asprogrammer
whether I put the power on or not same thing...
Chip is Winbond W25Q128FV
Any idea on this problem ?Last edited by Genova; 06-17-2021, 03:51 AM.Comment
-
Re: 840 g1
do not use the clip..draw wires from the chip to the programmer if you cannot remove the chip from the motherboard ... use one of these programs ..
https://www.badcaps.net/forum/showpo...6&postcount=10
https://www.badcaps.net/forum/showpo...04&postcount=7Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: 840 g1
Thank you will try thisComment
-
Re: 840 g1
it does the same, and when I get to connect to read and save the files they are not the same...
What type of wires do i need to buy ?Comment
-
Re: 840 g1
Attach the charger to the board after attaching the wires
https://www.badcaps.net/forum/showpo...6&postcount=51Comment
-
Re: 840 g1
Thank you will try this alsoComment
-
Re: 840 g1
Hi,
another one who just light on power led and nothing more...Last edited by SMDFlea; 04-12-2023, 01:58 PM.Comment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...
Comment