qosmio g50 dumps urgent anyone ???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • highpulse
    i hate HP
    • May 2013
    • 1489
    • portugal

    #1

    qosmio g50 dumps urgent anyone ???

    i there , i need the dumps for a qosmio g50

    there are 2 bios on it , EC 128k and main 2048kb , board its a FDUSY1 A-2354 A

    urgent , thk in advance

    this is something related with bios or KBC , since dc in stop on 3 mosfet , therefore charge dont receive 19 volts , but mani regulator 3.3 and 5 , receive the 19 volts , providing only the LDO . so something is not alowing the machine to turn on or start getting 19 volts on all parts of the motherboard,
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31214
    • Albion

    #2
    Re: qosmio g50 dumps urgent anyone ???

    i dont see a q50 at tosh,
    only f55-q502,503 etc.

    Comment

    • highpulse
      i hate HP
      • May 2013
      • 1489
      • portugal

      #3
      Re: qosmio g50 dumps urgent anyone ???

      stj , its not q50 , its G50

      Comment

      • ala_borbe
        aka Donald
        • Apr 2011
        • 1625
        • Malta

        #4
        Re: qosmio g50 dumps urgent anyone ???

        all bios flashes on toshiba web support for qosmio g50 and g55 contain only bios patches, not whole bios so it can only be acquired by dumping from another working laptop

        correct me if im wrong
        Im Back... sort of...

        Comment

        • stj
          Great Sage 齊天大聖
          • Dec 2009
          • 31214
          • Albion

          #5
          Re: qosmio g50 dumps urgent anyone ???

          still no.
          Attached Files

          Comment

          • highpulse
            i hate HP
            • May 2013
            • 1489
            • portugal

            #6
            Re: qosmio g50 dumps urgent anyone ???

            STJ im from portugal , so you might find it on "PT toshiba support" , as ala borbe mentioned i think its a bloody patch , since i downloaded it and dont find nothing usefull there
            guess if no one have a dump im doomed with this one , but still waiting the 771caodg since im suspecting it could be damaged , making the machine only having 19 volts on main reg , but on the charger

            Comment

            • ala_borbe
              aka Donald
              • Apr 2011
              • 1625
              • Malta

              #7
              Re: qosmio g50 dumps urgent anyone ???

              all g50 same bios

              http://www.toshiba.eu/innovation/dow...jsp?service=EU

              notebook -> qosmio -> qosmio G -> qosmio G50 -> --all--

              and click search
              Im Back... sort of...

              Comment

              • stj
                Great Sage 齊天大聖
                • Dec 2009
                • 31214
                • Albion

                #8
                Re: qosmio g50 dumps urgent anyone ???

                yea, got it.
                autoExec.0411
                autoExec.vbe
                BIO0060T.COM
                BIOSUPD2.INI
                CHGBIOS2.VXD
                CHGBIOSA.EXE
                CLEAN2.REG
                INSTALL2.EXE
                install2.exe.manifest
                MESSAGE.EXE
                nchgbios2.exe
                nchgbios2NT.sys
                nchgbios2svc.exe
                nchgbios2.sys
                NCHGBIOS2x64.SYS
                TBDECODE.DLL
                TBIOSUP.DLL
                TCHGBIOSInfo.dll
                tosclean2.bat
                tosclean2.pif
                toscleanAUTO2.bat
                toscleanSMS2.bat
                tosntclean2.bat
                tosntcleanAUTO2.bat
                tosntcleanSMS2.bat
                TosPwChk.dll
                TosPwChk.lng
                tsccall.dll
                WBDDC34I.DLL
                nothing obvious in that.

                Comment

                • ala_borbe
                  aka Donald
                  • Apr 2011
                  • 1625
                  • Malta

                  #9
                  Re: qosmio g50 dumps urgent anyone ???

                  BIO0060T.COM is the file that does the falsh, but not full flash, only patch
                  (its dos executable file)
                  on american support there g55 with (maybe) same bios, same way to flash only in addition dos flash image but also no bin file
                  Im Back... sort of...

                  Comment

                  • stj
                    Great Sage 齊天大聖
                    • Dec 2009
                    • 31214
                    • Albion

                    #10
                    Re: qosmio g50 dumps urgent anyone ???

                    it's not executeable - stick it in a hex editor.
                    i dont care that they put "COM" in the filename - it's not a com file.

                    Comment

                    • highpulse
                      i hate HP
                      • May 2013
                      • 1489
                      • portugal

                      #11
                      Re: qosmio g50 dumps urgent anyone ???

                      yes i know but also size is completely different :! 880k i got 2 bios , one 2mb and another 128k
                      so im a bit stuck

                      Comment

                      • highpulse
                        i hate HP
                        • May 2013
                        • 1489
                        • portugal

                        #12
                        Re: qosmio g50 dumps urgent anyone ???

                        even if im add it to the hed editor , the entire hex code is completely different from the one on the bios on the computer , it might add some code lines to the main bios , but im not expert in hex editiing unfortunetly

                        Comment

                        • stj
                          Great Sage 齊天大聖
                          • Dec 2009
                          • 31214
                          • Albion

                          #13
                          Re: qosmio g50 dumps urgent anyone ???

                          is this an EFI bios?

                          Comment

                          Related Topics

                          Collapse

                          • u666sa
                            HP Envy x360 13-bf0013dx (i7, 8gb) ipa32 la-m024p rev 1b short near PJ1802, type-c not switching to 19 volts
                            by u666sa
                            Laptop is HP Envy x360 13-bf0013dx, hp website link, it's an i7-1250U with 8 gig onboard ram.
                            Platform: ipa32 la-m024p rev 1b



                            Originally you'd plug power supply into it and it would take up to 1.2 amps and then drop to 200 milliamps and then go back up again to 1.2, staying all the while at 5 volts. Pressing power button would results in power LED blinking amber 3 times. 3.3 volt rail, 5.1 volt rail present, main power rail 8.8 volts. Power button test pads near EC chip 2.7 volts.

                            I found a short on the other side:



                            ...
                            10-04-2025, 05:03 PM
                          • supermattch
                            HP 15dy-2021nr wont power on mystery volts
                            by supermattch
                            Hi everyone.

                            I am diagnosing my personal laptop, because it wont power on and no leds light up.

                            At the dc-in there are 8 pins, 1 and 2 shows healthy 19.66 volts. The next three are ground, but the 6th one shows .283 volts. This is strange to me, it should be 3.3 or 5 or aome volts not 0.283v. As I am new to this, I would like some guidance. Please someone advise me on what to check next.

                            Oh the boardview and schematics I am using is for a similar model as I cannot find the proper one anywhere. Quanta DA0P5HMB8F1 rev F. Nowhere on the internet.
                            09-23-2025, 12:13 PM
                          • MisterAIL
                            PS5 digital / No Power / No Beep / Good power supply
                            by MisterAIL
                            Hi everyone,

                            Brought a non functionnal PS5. Apparently only a bad PSU...
                            No beep, nothing.

                            After some tests i found this :
                            - PSU is fine (12 volts stable)
                            - 12 volts line is shorted
                            - DA9065 was fried, F7003 also => Replaced both of them, short is gone on 12 volts line, no dead short anywhere else.
                            - By the way, nothing change. No signal, no power, no beep.

                            Mesuring all rails with my workbench psu (12 volts input)
                            - 0.00 amp drawing
                            - 12 volts, 5 volts, 2 volts, 1,15 volts are presents (suppose new DA9065 do is...
                            03-12-2024, 03:24 PM
                          • Mcfeetroy
                            Fishing bite alarm drains battery
                            by Mcfeetroy
                            Good day to all. The bite alarm drains 9-volt Krona batteries. Current consumption when switched on is about 50 mA. I wiped the board from oxides, I will attach a photo (on the board there is a j3y transistor and a 7533 stabilizer, the microcircuit is erased = (the 3.3-volt stabilizer heats up weakly. I replaced it, nothing changed. I unsoldered the microcircuit, the consumption disappeared. The resistance on the pins of the unsoldered microcircuit from the point clockwise is more than 2 megaohms, the 11th leg is presumably ground. I warmed up the microcircuit, the consumption does not change....
                            08-01-2025, 03:52 AM
                          • BTubbs200
                            Dead Dell Latitude 5420 not receiving 20 volts from USB-C charger
                            by BTubbs200
                            Hello,

                            Dell Latitude 5420 P137G
                            Board: LA-K491P REV A01

                            I have received this laptop which was described as "does not power on or accept charge." Battery shows no sign of charging when charger is plugged in, nor does the board show any signs of life when battery is unplugged and charger is plugged in. No light from the LED at all or any other indications of activity.

                            Board seems to have no shorts, all power rails are fine and show high resistance.

                            When charger is plugged in, voltage is present in 3.3V rail but absent in others....
                            01-24-2025, 08:15 PM
                          • Loading...
                          • No more items.
                          Working...