NR2202RX R1.2 bios

[Tondo27]

Good day, I would like to flash the BIOS of a notebook that turns on but remains on a black screen. It is an AMD version. I have tried to find it on the Asus websites but to no avail. If you could help me, I would be very grateful. I will attach the original BIOS.MODEL: ASUS GX650RX-xs97
S/N: N3NRKD011944126
Motherboard: NR2202RX R1.2
Thanks.

[Tondo27]

Does anyone have a working bios for this laptop asus zephyrus duo 16 gx650rx? NR2202RX REV. 1.2 thanks

[SMDFlea]

Does anyone have a working bios for this laptop asus zephyrus duo 16 gx650rx? NR2202RX REV. 1.2 thanks

Your posts have been moved to a new thread topic as your motherboard revision is 1.2 .Post pictures of the barcode and/or QR codes on the motherboard

[hardware1]

Good day, I would like to flash the BIOS of a notebook that turns on but remains on a black screen. It is an AMD version. I have tried to find it on the Asus websites but to no avail. If you could help me, I would be very grateful. I will attach the original BIOS.MODEL: ASUS GX650RX-xs97
S/N: N3NRKD011944126
Motherboard: NR2202RX R1.2
Thanks.

Here is your new file, it's a virgin BIOS from ASUS with your DMI and Windows Key.
I got this file according to your Serial Number (N3NRKD011944126), I also found the same Serial in your file, so I assumed it's your original BIOS.
Anyway, it's always better to look for QR on your motherboard and post an image for it (as SMDFlea told you.)

[Tondo27]

I am attaching another qr code from the board. It seems that the bios started working, but I still don't have a picture and the fans don't start. But after flashing the bios, the vcore voltages also start working. It seems that all the power supplies are working except for the PEX vdd. Is it possible that the VBIOS is also damaged?. The EN voltage and the VIN voltage are working on the chip, the powergood does not work. thanks.

[hardware1]

I am attaching another qr code from the board. It seems that the bios started working, but I still don't have a picture and the fans don't start. But after flashing the bios, the vcore voltages also start working. It seems that all the power supplies are working except for the PEX vdd. Is it possible that the VBIOS is also damaged?. The EN voltage and the VIN voltage are working on the chip, the powergood does not work. thanks.

If you press on the Caps-lock key, its LED is responding or you can hear any sound while entering BIOS Setup for example? Have you tried to check your LCD and the LCD ribbon cable? Tried to connect the laptop to an external monitor through HDMI?
It don't know about the vBIOS, but you can send the file, write your GPU details and we will try to find another one for you.

[Tondo27]

Hello. I looked and capslock doesn't respond, only the cpu and gpu are heating up. All voltages are working except pex vdd. I also tried hdmi without any results.

[hardware1]

Hello. I looked and capslock doesn't respond, only the cpu and gpu are heating up. All voltages are working except pex vdd. I also tried hdmi without any results.

It could be a Hardware issue. Maybe someone else can give you a file to try it. I tried to find another similar BIOS but I can't find it anywhere.

[Tondo27]

It's okay. I'll try to find out if someone has a similar notebook so they can provide me with the BIOS for the trial. Thank you.

[pooya_pm]

It's okay. I'll try to find out if someone has a similar notebook so they can provide me with the BIOS for the trial. Thank you.

PLS SHEAR WORKING BIOS

[shiyab]

PLS SHEAR WORKING BIOS

post backup bios and snid

[Tondo27]

Hello. I would like to ask if you could remove the nvidia gpu from the bios so that the laptop starts via igpu and does not detect the nvidia gpu and the post runs. I suspect that the laptop is working but detects a damaged gpu and therefore the post does not run completely. thanks